Modern Tapered Planters

7 materials
$100
1 Day
Easy

With our dream house build mostly out of the way, it is time to get back in the shop and make some sawdust. This time we are making two tall planters for the front porch. We decided on a tapered planter which has been done over and over again. However, we wanted to switch it up and go for a modern look with sharp clean lines. The problem is that most weather resistant woods (like cedar) are soft and have a lot of gaining that would show through the paint.

Dimensions
Cut List
Painting

Since this is bare wood we needed to prime that planters first. For that we used a spray primer in gray since we were going with a black top coat.


We went with a black exterior paint with a satin finish. Paint not only gives the planter the color you want but it also protects from moisture getting into the wood. That means you will want to paint every surface, including the inside, bottom and feet.


Adding Feet

We added feet to to the bottom pf the legs to keep the legs up off the ground. That way if there ever is water sitting on the ground, the wooden feet will not come into contact with it.


Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Rogue Engineer
Want more details about this and other DIY projects? Check out my blog post!
Go

Questions on this post

Have a question about this project?

Your question...

Comments

Join the conversation

2 of 9 comments
Your comment...
Next