PVC Fence

4 Materials
$25
2 Hours
Medium

In our backyard I wanted to build a PVC fence that goes from post to post of a patio. Originally, I build the fence out of wood but it only lasted 3 years and then started to rot because of the rain. So I decided to rebuild it using PVC pipe. The PVC pipe should last a lot longer and the price is not much different from the wood fence.


The instructions below are for just one panel. So if you decide to build this PVC fence and you need more than one panel then you’ll need to do the math for additional material.


For more pictures visit our website

Step-1 Measuring and Cutting Rails

Depending on your needs the rail length might be different than what I’m providing, but in my case, I needed the fence penal to be 77 1/2". So the first step was to cut the 3" round PVC pipe to 77 1/2" (x2).  You don’t need to have a special blade to cut PVC pipe. I just used my to cut the pipe using regular blade that cuts wood.

Step-2 Drilling Holes for Pickets

Now both the upper and lower rails need holes drilled for 3/4" PVC pipe pickets. At the time of building this PVC fence, I only had manual drill press available. I built a jig and attached the manual drill press on top to drill the holes at 90 degrees. An electric drill press would probably work better than what I had available.

Starting from one end, pull a measurement of 3 5/8" and make a mark. This will be the center of the first hole, after that, the holes are every 5" from center to center. The outside diameter of 3/4" PVC picket pipe is 1 1/16". So you will need 1 1/16" hole saw bit for drilling these holes. I clamped the 3" pipe to the table using Tektron C-clamp so that pipe will not move or rotate. Then slide the jig across to each mark and dill the holes.



Step-3 Cutting Pickets

Once you have both upper and lower rails complete and all of the holes drilled, cut 15 pickets. Take 3/4" PVC pipe and cut it to 32" long using PVC cutter. There will be 15 of these pickets.

Step-4 Screws for Bottom Rail Stopper

Place a mark 4" from the bottom of the picket PVC and screw in a Hex Washer Head Metal Screw 7 x 1/2 at that mark. This will prevent the lower rail from sliding past the screw. Do this on all of the 15 pickets.

Step-5 Inserting Bottom Rail

Slide the pickets thru the holes of the lower 3" pipe rail. The 1/2" screw will prevent the rail from dropping down to the floor.

Step-6 Screws for Top Rail Stopper

Similar to step 5, but now place a mark 6" from the top of each picket and screw in the 1/2" screw at that mark. The upper screws need to be facing the same direction as the lower screws.

Step-7 Top Rail and End Caps

For the last step, slide the pickets thru the upper rail. The screws will hold the rail from sliding down. Place the PVC end caps on top. Spray paint the entire PVC fence panel. You're done.


Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
TheDIYPlan
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 44 questions
  • Lisa Lisa on Sep 26, 2021

    Love this!! Anyone have any ideas on how to add a gate also?

  • Cindy Quinn Cindy Quinn on Sep 30, 2022

    What was total cost?

  • Linda Linda on May 06, 2023

    Have a PVC fence from another house. How do I attach it onto my patio because there are no posts? Just a plain cement slab. This is a condo , so I can't attach it into the grass. It's for my top poodle. Thanks for the help.

Comments
Join the conversation
2 of 185 comments
  • Pat69819001 Pat69819001 on Sep 27, 2022

    Great, for the garden also, awesome,

  • Jim Cox Jim Cox on Jul 25, 2023

    This is schedule 40 PVC, which is not rated for sunlight. The alternative is Electrical PVC conduit listed for outdoor use. Might cost more up front, but you won't have to build it twice

Next