How could I make window scarf valance supports?

Hi Michelle,

Thank you for your description, You attempted to make something beautiful and you were disappointed. Could you please give us a picture so we can we see what you see and offer you some good suggestions. Many thanks and have patience, we are on the job once we see it.

Maybe glue decorative buttons on the ends?

I am assuming this is what you are trying to do with your long scarf. Do you have another rod up that you can swag the scarf on as shown in this picture? I am not sure what you mean by using door stops. I think if you have your 84 inch sheers mounted inside the window on an extension rod and then used another rod above the window as shown you might get what you'd like to see for your window. A picture of what you have already tried might be helpful! I hope we can find a way for this to work out for you!

you can use some glass or acrylic cabinet door knobs hot glued on the tips of the stops use E6000 glue let it cure/dry full time it says they might even screw directly into the door stop end where rubber piece is see if they would fit sometimes the rubber tips screw off for replacement. I'm guessing you mean regular screw in rigid door stop(yes?) like these?? https://www.amazon.com/s?k=rigid+door+stops&gclid=EAIaIQobChMIhc38wbH85AIVi_5kCh0O7Q9xEAAYASAAEgIBv_D_BwE&hvadid=178357743266&hvdev=c&hvlocphy=9030040&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=5695619539857970023&hvtargid=kwd-12934049974&hydadcr=24527_9931747&tag=googhydr-20&ref=pd_sl_281upgsmvn_e HERE ARE KNOBS https://www.google.com/search?q=clear+acrylic+cabinet+knobs&safe=active&rlz=1C1CHBF_enUS750US750&source=univ&tbm=shop&tbo=u&sa=X&ved=0ahUKEwjSi4ukr_zkAhWMlp4KHZJ-ArQQsxgIMQ&biw=1366&bih=657 IT'll work fine knobs should hold valance on better too