How can I use PVC pipes to make shoe storage?
+1
Related Discussions
Suggested Project Book
Hi Terry. I'm Cindy. I did a bit of reading so that I could answer your question properly. Here's what I learned: If your PVC pipes are at least 6 inches in diameter, they should make fine shoe storage. Measure the length of your shoes and cut the PVC pipes that same length. (about 12 inches on average) Use a circular saw to make the cuts. The saw will create a lot of bits and pieces. Use your hair drier on cool to blow the bits out. Then wipe the pipes out. Next, use an all-purpose cement glue to glue your pipes together. This sounds like a DIY I would like to try. Good luck Terry.
Hi Terry, you might find this article helpful.
https://www.instructables.com/id/PVC-Pipe-Shoe-Rack/
Terry Lynn: maybe this will help
https://macgyverisms.wonderhowto.com/how-to/build-low-cost-shoe-rack-using-pvc-pipes-0141340/
This one will show you: https://www.hometalk.com/diy/s-15-ridiculously-cool-uses-for-leftover-pvc-pipe-30512555