I want to make fake drive in movie speakers. Maybe out of cardboard or another inexpensive material
I am doing wall decor what is the best glue to used Thanks.
Want to put a frame around a mirror in guest bathroom?
It is a fame with a piece of bead board glued to the back - how do I separate them without damaging either piece?
I went to Santa Fe New Mexico over the holiday season and would like to make some luminaria for my yard. I would like to use the Christmas lights but I don't wont to... See more
I have two metal crosses that I need to add a hanger to. Any ideas how I can manage this?
I have several pictures printed on 1/4" foamboard and none are a standard size. I do not have the ability to cut my own wood to construct them. I need to frame them... See more
we have an abundance of cedar trees that my husband was hoping to sell to Make money. We haven’t found any buyers, so I was looking for Diy ideas that we could do t... See more
The wood is walnut and the lettering is done with a wood burning tool. It will be outside 24/7/365.
longer than 2 ft or more?
It’s not real shiplap just boards that we made to look like shiplap.
I chainsaw carve , it a hobby i picked up this past year. I believe I am getting pretty good at it. I am looking for a sealant to preserve my work for many years.
I have a terrible lack of patience and have never in my 78 years had the patience to take a wood-working project to completion. More than a do... See more
The sander is old but works fine so I bought sand paper which is hook and loop. Unfortunately the sander takes sticky back paper which I couldn't find at Menards. Nor... See more
We bought a house a couple of years ago and are slowly renovating the whole place. We opened the master bedroom closet from bi-fold doors to sliding doors since its o... See more
I want to build a small, narrow cabinet. I want it to be 10 inches wide and 6ft long, 4 ft high. I would like it to have 2 doors, for canned goods.
How can I cover popcorn ceilings using pine paneling?
Would love to add this tool to my arsenal of skills but for whatever reason, I am very intimidated by it and have yet to cut a piece of wood with it. I'm big on safet... See more
We want to put plywood (maybe 3/16 or so - the paintable kind) on the wall in 6" wide strips to look like shiplap. I have seen some blogs who say even when Home Depot... See more