Asked on Dec 4, 2019

How do I “ disguise” the innards of lamp hardware?

JaniceJohnavallance82Emily
+14

Answered

I have a drum style lamp shade that is very pretty, however you can see right through it; The ugly lamp hardware shows through and I’m trying to figure out how I can disguise the hardware or soften it or… something so that you don’t see the ugly hardware. Any ideas out there?

9 answers
  • Robyn Garner
    on Dec 4, 2019

    How about spraying it all white to blend in?

  • Nan W.
    on Dec 4, 2019

    Robyn's idea is great! Smart!

  • K. Rupp
    on Dec 4, 2019

    I'm getting the idea that you are supposed to see through the shade with the material that is on there. If you don't want to see through it at all, yes, by all means paint it with a pretty color or gold or silver. But if you like that see through look, why not play up the inside a little and hang some crystals on strings, hanging from the rods around the light bulb. The strings can come down all the way or halfway down around the light bulb....your creation. It might add a lot of interest. OR what what if you put a thinner straight drum shade in the middle of this shade. Just throwing out ideas! :). Good luck!

    • K. Rupp
      on Dec 5, 2019

      Oh great! Glad my suggestions helped you. Looks great, hope you like it in your room! And thank you for the outcome....I usually never hear back let alone get a picture!!! Thank you :)

  • Johnavallance82
    on Dec 4, 2019

    Hi there,

    You could stick Mirrored Sticky backed plastic like Contact and available from craft stores to cover up what you don't like. They also sell the same thing in gold/brass -silver/steel and Bronze.............

  • Em
    on Dec 4, 2019

    Buy a decorative bulb and let it show thru. Or add paper to the inside of the shade using a large sheet so you will only have one seam. cut to fit and tack it on with hot glue.

  • Ken Erickson
    on Dec 4, 2019

    Anything you do is going to diminish the amount of light.

  • Emily
    on Dec 4, 2019

    I agree that it is not attractive as is. It would not be difficult to make an opaque shade fo this lamp. Paper, fabric or a combination of them.

  • Johnavallance82
    on Dec 5, 2019

    Hi, How come you didn't know all you wanted was a 1960's lampshade?

  • Janice
    on Dec 6, 2019

    It's always fun to print something on a white sheet of paper and insert onto the back side of a lampshade. When lit, the word shows through....... I've done ZZZZ in large to small font, just makes me smile when I turn my bedroom lamp on while getting ready for bed. Subliminal suggestion........ :) Or you could use some uplifting word you like.

    • LK
      on Dec 7, 2019

      Oh I like that idea. I’ve just stuck a smaller shade underneath the larger one however, I may give some more consideration to your idea. Thanks!

Your comment...