How do I adjust cabinet doors?

You don't mention what kind of hinges you have but I found some information that might help you! It is a matter of messing around with the screws until you get them to where things are working properly. Even the simplest hinges can be screwed on too tightly and just loosening them helps.

https://www.thespruce.com/how-to-adjust-cabinet-hinges-1822181

https://www.wikihow.com/Adjust-Soft-Close-Hinges

https://www.hunker.com/12000487/how-to-adjust-kitchen-cabinet-door-hinges-that-dont-close-completely

Hi GK! Have run into this problem before painting cabinets! What has helped me is going up one drill bit size and every so slightly widening the original hole for the screws! Hope that helps!

Since you purchased these expensive hinges at Lowes, I would contact them to get the customer service number for the manufacturer to get some technical support for fixing your problem..... there is always a solution.... you just gotta find it.

Could you post a picture of the hinge and maybe a picture of exactly how they are not lining up and hopefully I can give you some advice

You could try using longer screws. Also, drilling pilot holes might help. If you still can't get them to fit, call the customer service department at the manufacturing company.

Here's a post that might help you - https://www.thespruce.com/how-to-adjust-cabinet-hinges-1822181

Are they the kind with the screws if they are you need to hold the door open and get a screw driver and hold the door and turn the screw then close the door check it and keep doing that till it is good