I'm wanting to install corrugated metal for shower encloser.Would like a step by step video.
A 30 second Google search turned up these results.
Here's one for you:
You might take a look at this video Rebecca!
As soon as you cut or drill holes for any edge of the steel, it is no longer galvanized in that area.
It will rust, sooner or later, even if you put silver spray paint in and around every cut or hole. The exposed screws will need to be stainless steel. I would seal all the seams & holes with silicone aquarium-grade caulk.
I would not remove the existing shower walls because of water & humidity infiltration at the tops & bottoms.
This video shows how to do it: https://www.youtube.com/watch?v=4xz6jlhkT9U
Here are a bunch of videos.... this stuff will rust whereever you put a screw so spray the holes and cut edges with clear exteriror spar varnish.... https://www.youtube.com/results?search_query=how+to+use+corrugated+metal+for+shower+walls Plan on annual maintenance to keep it looking good.
Hi Rebecca, here's one more video that may help you
Here is a great video https://www.youtube.com/watch?v=xlP6fRd_DuM
Here is a video. https://www.youtube.com/watch?v=xlP6fRd_DuM