First off, run a level chalk line and screw in a ledger board. Set the cabinet on the ledger, then screw through the back of the cabinet into a stud using a gold colored drywall screw. When you hang the next cabinet, align the face frames and screwed the face frames of the two cabinets together. You will need to level all three dimmensions and use shims to adjust.
First thing to do is to find the studs we’re your hanging the cabinet and mark them with a level.you will need 5 inch sheet rock screws,a drill a level.a pencil.and another person to hold cabinet .mark the studs place the cabinets we’re you want and measure with the level if there straight.drill a screw in to we’re the stud I’d up top to hold the cabinet up then before you put another screw on the other side on top get the level to make sure it’s it’s level then screw in the other screw then just drill down from other screw and add 2 more straight down from others.
A family member gave up some upper cabinets that I would love to have on the back wall of my kitchen but I can not find where the studs are in the wall. Any suggestio...
See more
Over the years, the satin nickel knobs on my kitchen cabinets have gotten a bit dirty.What is a safe way to clean them, to restore their shine, without causing any ha...
See more
Help! I have removed the old shelf paper that was glued to my wood kitchen cabinet shelves. The glue residue is awful and won't come off! Its very sticky. I have trie...
See more
Hi Denise
I assume you are talking about a kitchen or bathroom cabinet? here is so info to help you.
https://www.youtube.com/watch?v=AGNTKFpn-kY
https://www.youtube.com/watch?v=eVN3oVys3cs
Take a look at this:
https://www.homedepot.com/c/ah/how-to-install-wall-cabinets/9ba683603be9fa5395fab903783e4db
Hi Denise, here is a video I hope will help you hang your cabinets. Search Results
Featured snippet from the web
0:43
2:43
Suggested clip · 108 seconds
www.youtube.com › watch
How to Hang Cabinets - YouTube
Here is some Information that may help.
https://www.bunnings.com.au/diy-advice/kitchen/benchtops-and-cabinets/how-to-install-kitchen-wall-cabinets?gclsrc=aw.ds&&gclid=Cj0KCQiA9orxBRD0ARIsAK9JDxSnd2Nz1JskhWuRLayhXZ6QNSC-h3P8VkKYCevQFVBufVIfbuNkwP0aAuUxEALw_wcB
First off, run a level chalk line and screw in a ledger board. Set the cabinet on the ledger, then screw through the back of the cabinet into a stud using a gold colored drywall screw. When you hang the next cabinet, align the face frames and screwed the face frames of the two cabinets together. You will need to level all three dimmensions and use shims to adjust.
This might help: https://www.youtube.com/watch?v=yRwbLtSHKPU
and https://www.youtube.com/watch?v=AGNTKFpn-kY
Here's some useful tips
https://www.diydoctor.org.uk/projects/wallunit.htm
some tips here: https://www.youtube.com/watch?v=fM906TG-PYw&t=2s
First thing to do is to find the studs we’re your hanging the cabinet and mark them with a level.you will need 5 inch sheet rock screws,a drill a level.a pencil.and another person to hold cabinet .mark the studs place the cabinets we’re you want and measure with the level if there straight.drill a screw in to we’re the stud I’d up top to hold the cabinet up then before you put another screw on the other side on top get the level to make sure it’s it’s level then screw in the other screw then just drill down from other screw and add 2 more straight down from others.