How do I waterproof a wooden piece of furniture for my back patio?
I found a gorgeous solid wood “buffet”type piece of furniture. I need to waterproof it for use in my back patio. I may also paint it a little. What should I use ?
Related Discussions
How do I secure my 1st floor patio furniture from vandalism?
I live on the first floorof an apartment building. How can I secure my patio furniture without it being unsightly?
How do I waterproof/seal my front porch?
The wood that was used is NOT treated lumber! The porch is over my concrete basement. I need to stop the rain/snow from coming thru the tongue and groove and into my ... See more
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
Scored this beauty - a vintage 1950's porch glider with original paint. Any tips on protecting it from the elements?
http://eclecticallyvintage.com/2012/05/thrift-vintage-glider/
Pitted outdoor furniture...any ideas?
I bought expensive outdoor furniture that is now pitted. See photos. It seems to be pitted the worst around the bottom area where it sets on the floor. It seems to bu... See more
What color outdoor umbrella do you recommend?
I bought a wicker sectional with navy blue cushions for my back patio that has unground pool. it will sit in the corner of my pool area with 2 wicker lounge chairs on... See more
How do I make back deck kid friendly?
I’d like for my girls to play on our back deck some and want to make it family friendly and comfortable since we aren’t able to do a screened in porch anytime soo... See more
You could use an exterior Urethane. You want to make sure you get the waterproof version.
Hi Nancy. Hope this information helps you get your furniture piece waterproof.
To waterproof wood, start by sanding it with fine grit sandpaper to remove any imperfections and prep the surface. Then, use a rag to apply an even coat of linseed oil, walnut oil, or tung oil to the wood and let it cure for 24 hours. Repeat the process 2 more times so there are 3 coats of oil on the wood.Dec 3, 2019
www.wikihow.com › Waterproof-Wood
3 Ways to Waterproof Wood - wikiHow
There are three surefire ways to waterproof your wood for years to come.
You could also read this: https://www.bobvila.com/articles/how-to-waterproof-wood/
Helmsman Marine Spar Urethane. Used on wood surfaces on boats.
You can use a finish called spar urathane which is outdoor safe!
All of these are great answers, but I would still keep it “under wraps” when not using it. Just like the BBQ grill.
its not redwood, nor teak nor treated lumber.
I would use marine-grade wood sealer.
Spar varnish works on all wood. The BBQ grill I would just buy a cover.
If your piece has woodgrain then put a couple coats of MARINE VARNISH on it. Painting: Gently sand, put on a good primer, Zinsser Bullseye 1 2 3 primer and the paint with your exterior latex, at least two coats.
I would use marine paint and spar varnish, both used in boats. Rustoleum makes 1 quart sized cans you can get at True Value. That said, if its fully exposed to the elements, you will have to touch it up at least once a year.