Easy Pallet Centerpiece
Using pallet scrap wood, you can make a stunning centerpiece that can be used for any season!
Easy DIY that takes only 30 minutes!
Cut three boards the same length and make sure two of them are also the same width. These two boards will be the sides while the third board will be the base of your centerpiece, so it’s ok if it’s width is different. Then cut your ends to match the width of your base and height of your two side boards.
Sand the edges of your boards so they aren’t so rough to handle.
Use your nail gun (or just a hammer and nails!) and start putting your box together. We started with the base and two long sides, followed by the short sides. We used four nails on each long side and two on each short side.
That’s it! Now you’re ready to decorate. I like to start with greenery garland and add seasonal decor. Enjoy!
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info