The best tool to cut terracotta pots is with a rotary tool fitted with a tile-cutting bit. Soak the pots for at least 20 minutes before cutting. Then draw a line where you plan to cut. Secure the pot on a sturdy surface . A vise would work best. Drill a pilot hole and begin cutting.
I have a really cool Halloween Dummy with cloth stuffed body and plastic hands feet and head. He is very white and I want to stain him like he has a tan. Any ideas?
I have a sink that needs a sink skirt or something around it. I keep taping on the skirts because there is nothing to affix the skirt to the sink and two sides of... See more
Want to make some small buildings (a church, home, restaurant, etc.) to set up around a miniature train set. Considering using cathedral glass and painting windows,... See more
I plan to paint floral foam(green styrofoam) then glue shells on to it. What kind of glue should I use to glue the shells on? I have read that E6000 isn't used for... See more
Hi, Does anyone know if the "Dollar Store" sells "Washi-tape" ( silver), I made a mistake and bought it on eBay but it is too Broad ( 48 mm, I would need "Half that... See more
I have fabric Mask,I have 'used' N95 mask that I took the metal nose part off and sanitized, and glued onto the fabric mask,but when washed a couple of times it comes... See more
I have a pic between two pieces of acrylic. I know there are standoff screws which would be great if were smaller. Is there ANYTHING else to use that would look good... See more
I have tried to use hot glue to glue metal bottle caps to a cork bulletin board by filling the cap with hot glue and immediately putting it on the board. Some cap... See more
I am having the hardest time finding actual red all the way through...glass gems, one flat sided. So many I have looked at are coated with a paint Of some sort. I... See more
I found a beautiful picture at GW, but the frame is not so great. The frame was originally has a gold finish with pretty detailing. It looks like the previous... See more
Found “mini“ lamb pan by Wilton at Goodwill. This is NOT the three D pan.I need to know how much batter, time and temp. Also decorating tips would be handy as well.... See more
I'm making an outside glass birdbath with old vases and dishes and I need to know if using plumber's putty to seal everything can be done or should I take that off... See more
I want to frame a mirror with marbles glass tiles. I am going to use a glue gun. There seems different sizes of glue guns. What size should I buy? Would a mini... See more
The best tool to cut terracotta pots is with a rotary tool fitted with a tile-cutting bit. Soak the pots for at least 20 minutes before cutting. Then draw a line where you plan to cut. Secure the pot on a sturdy surface . A vise would work best. Drill a pilot hole and begin cutting.
Thank you
Here ya go
https://acraftymix.com/blog/cut-terracotta-pots-tree-planters/
https://www.ehow.com/how_7172888_cut-terracotta-pots-half.html
Use a tile saw
Hi there, we use our Dremel with a diamond cutting wheel to cut all our pots. We wrote an article about it here - https://acraftymix.com/blog/cut-terracotta-pots-tree-planters/
You're most welcome. Have fun with your terracotta pots.
A dremel will work great.
Hello. Are you looking for ideas other than plants? Are you looking for ideas to upscale terra-cotta plans or make different things.
here is another idea for you as well
https://www.youtube.com/watch?v=zz0I6qSB7Z4