How to Build a Simple Potting Bench.

Stacy Davis
by Stacy Davis
4 Materials
$50
1 Hour
Medium

I’ve been wanting to make a potting bench for years. I finally decided this is the year to make it but the catch is that I didn’t want to buy anything new for it. Reality was that I did need to buy some screws but the rest was from dismantled projects or things that I had on hand. Also, my fence pickets that make up the majority of this project come pressure treated so you do not have to stain or seal these. I love that.

This potting bench is made from 7 fence pickets (about $2 apiece), 2 stair treads ($12 apiece), 2 shelf brackets ($10) And 4 fence post tops. I don’t remember what the fence post tops cost but omitting that, the cost is about $48.

I put the stair tread with the fence post tops as feet upright and used screws to attach the pickets to the back. So, guess what? The back legs (fence post tops) are not needed. The fence pickets act as back legs and if you want to save some bucks on the front legs just use 2 by 4’s.

https://www.hometalk.com/diy/build/furniture/how-to-build-a-dresser-of-sorts-in-a-minute-and-a-half-35345711


Here is where the work surface and my bottom for this project originated.

I attached the two ends first. For the third picket placement, I went to the center and placed it in the middle. The remaining 4 pickets were added just eyeballing the distance.

All 7 are attached. Next comes the work surface.

I added the brackets and attached each picket to the stair tread with screws. These shelf brackets aren’t really necessary because I ended up adding supports later on. But I will say these brackets made it easier for me to assemble by myself.

Next supports for top shelf. I had a piece of scrap that measured 5 1/2 inches across. I measured 5 1/2 inches and cut two square pieces and then cut the two pieces on the diagonal to make the shelf supports.

Finally, I added the shelf and attached it with screws through each picket.

I added four 2 by 2s at each corner of my work surface.

I added cross braces in a “pallet” fashion. 3 on the outside and one on the middle of the inside.

I love it!

The only change I want to make is the shelf on the bottom. I want to find a wider piece of wood or two piece to fit that area better.

I am so proud that I shopped my garage and didn’t purchase anything new to make it. Just the screws.

What do you think? Could you use a potting bench?

I’m ready to start spring planting now. How about you? Anyone winter sowing? I thought I might try that this year. icon

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  3 questions
  • Judy Buldak Judy Buldak on Feb 24, 2020

    Did you stain or varnish the wood?

  • Aaron Choquette Aaron Choquette on Feb 24, 2020

    Did you use a moisture sealant to seal the wood from water rotting?

  • Betty Betty on Feb 29, 2020

    I'd really like to know what paint and what color you used. I love the blue.

Comments
Join the conversation
2 of 24 comments
  • Cma42148096 Cma42148096 on Jun 02, 2020

    Looks great!

  • Nancy Nancy on Jun 23, 2020

    NICELY DONE! I have been looking to make a simple potting bench. Your project has inspired me. I love how you used materials on hand. I do not have stair treads, but I do have some nice lumber I picked up on the clearance cart at Home Depot that will work great for the shelves. I love how you used fence pickets, I have used them on projects as well - they are so cheap if you need to buy them.


Next