No-Sew Pleated Curtains

6 Materials
$100
10 Hours
Easy

Create designer look triple-pleat curtains without a single stitch! Use iron-on adhesive and fabric glue for an easy alternative to designer-look pleated curtains.

Determine pleat spacing before finalizing material yardage

How closely your pleats are spaced will affect how much your material "shrinks" upon inserting the pleater hooks, so determine how far apart you want the pleats. I tested with a piece of pleating tape and hooks to see how much the tape "shrunk" with the spacing I wanted and determined the width of panels I needed based upon that shrinkage. Also take into consideration the mounting location for the curtains. Allow 2 extra inches on each side of each panel for a hem, 4 extra inches at the top, and 2-4 inches at the bottom depending on whether you use drapery weights.

Prepare the panels

After determining the appropriate width for each panel before hemming and pleating, cut the material and lay out on a flat surface where you will be able to iron the edges. Fold the top edge over to create a 4" hem.

Use Heat 'n Bond to create hems

Insert a strip of 3/4" wide heat adhesive on the inside of the fold where the edge of the material meets the panel all along the top hem. Iron sufficiently to create a bond. Fold side edges over approximately 1" (just enough to cover a strip of adhesive which should be inserted into the fold) and iron accordingly. In the bottom hem, if desired, place drapery weights evenly spaced through the panel, place adhesive strip over the tab to hold in place, fold material over and iron in place.

Glue the pleating tape to the top hem

Using a consistent amount of fabric glue along the top, bottom, and middle of the back of the top hem, adhere pleating tape (ensuring the pocket side is facing out and down towards the bottom hem), press firmly and allow to dry for at least 6 hours, preferably longer.

Insert the pleater hooks

After allowing ample time for the glue to adhere and dry, carefully begin inserting the hooks at the desired spacing. Remember to take into account the end hooks that will be inserted into the very last pocket on each side of the panels.

Hang as desired

Hang the curtains as desired and admire your work!

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

30 Ways To Use Old Jeans For Brilliant Craft Ideas
15 Amazing Things You Can Make With Dollar Store Gems
31 Amazing Furniture Flips You Have to See to Believe
30 Essential Hacks For Cleaning Around Your Home
21 Insanely Cute Reasons to Add Pineapple to Your Decor
30 Genius Ways To Make The Most Of Your Closet Space
31 Super Cute & Easy DIY Ideas For Your Kitchen
30 Ways To Use Old Jeans For Brilliant Craft Ideas
Creative Parents Share These Brilliant Kids' Project Ideas
23 DIY Wall Clocks That'll Transform Your Whole Room
Fake It Until You Make It! 27 Creative Hacks for High-End Looks
17 Faux Brick Ideas For Your Home
30 Unusual & Helpful Gardening Tips You'll Want To Know
11 Unexpected Ways to Use Spices in Your Home
31 Amazing Furniture Flips You Have to See to Believe

Have a question about this project?

1 question

Join the conversation

2 of 3 comments
  • Jessica
    on Mar 23, 2020

    Wow! Amazing job! Thanks for sharing.

  • Flipturn
    on Mar 31, 2020

    If you do choose to try to attach the pieces to each other with the iron on adhesive, remember to put your iron on a 'dry' or 'no steam' setting.

    Use steam only when removal is desired.

Your comment...