What's the best way to cut CD'S?

Hi there, sounds like this gal tried just about every method under the sun and finally came on a simple and easy solution! https://kristilynglass.com/2016/07/22/creations/the-best-way-to-cut-a-cd-or-dvd/

A good pair of scissors

https://www.hometalk.com/diy/upcycle/bling-bling-house-numbers-20956562

https://www.hometalk.com/diy/decorate/rooms/how-to-make-unicorn-bust-with-cd-mosaic-30016128

https://www.hometalk.com/diy/kitchen-dining/kitchen-dining-furniture/broken-dvd-countertop-a-labor-of-love-32146492

Hi Jen, this blogger seemed to try every way they could think of and came up with the best way to do it: https://kristilynglass.com/2016/07/22/creations/the-best-way-to-cut-a-cd-or-dvd/

Score and snap with a razor blade. Score both sides. Or a Dremel with a cutting wheel.

Large tin snips will work.

You can use metal snips!

I use a pair of wire cutters.

Hi Jen. You can use scissors to cut up CD's. Be safe and wear gloves and safety glasses. Stay well and healthy. Good luck Jen.

Hi! I use utility scissors, like kitchen scissors. Stay well!

I put mine in a pot of water on the stove which makes them a bit softer and easier to cut. You can use scissors or metal cutters.

Have you tried tin snips?

Once when we put up vinyl siding on our house by ourselves, we figured out the easiest way to cut the siding vertically was with a heavy duty paper cutter. They type that you lay the papter on and then pull the metal arm down and it slices through the stack of paper. Yup, that worked fantastic on the vinyl siding to cut clean on the end. That may work great for your cds as well?

With a metel snip but they will crack your better just bending them

Hi there, we cut ours with sharp garden shears. Some CD's can be broken by hand too. You just need to remove the protective plastic coating.

Try to score the cd with a knife or boxe cutter a couple of times then snap it in half