How to add a door to an old lean-to shed??
by
Tracy
+18
I'm renting a house (26 month agreement) that has a 3 sided lean-to shed in the back yard. I'd love to put my push mower in it but know that it will get rained on. I am trying to determine a cheap way to build a door to cover enough of the front opening to protect my push mower. Any help would be great!!! Thanks!
Related Discussions
Suggested Project Book
Maybe something like this?
https://pin.it/5B8qbkP
A tarp and some screw in hooks so you can attach the holes in the tarp to the hooks. It's not the most attractive option but it would be cheap! Tarps do come in a few different colors!
How about a barn door type door. The door would slide from one side to the other.
A piece of plywood or under lament and a couple of hinges can close off the side. It will last the 2 years that you will be there.
A tarp is probably the cheapest and easiest way to go about this. You might run some of the ideas by your landlord.
Hi Tracy, I'm not sure how high the opening is but perhaps a shower curtain or two will work. You'll need to weigh the bottom down with something heavy though so it doesn't blow around when it's windy
It will be very difficult to mount a shower curtain securely without having the force of the wind tugging against it causing it to rip. Putting weighs at the bottom will only add to the gravity that will be pulling it down. A shower curtain will not withstand normal outdoor weather conditions.
If you decide to go with a tarp solution, purchase a high quality heavy one with a visible weave.
Here's a post that might help - https://myoutdoorplans.com/shed/doors-for-a-lean-to-shed-plans/
Be sure you check with the landlord first, make sure that any alterations you make are approved before doing anything.
Thanks everyone! With all the ideas, I think I now have a good idea of what I'm going to do! I'll post pics once finished!!