how to make soda cans pinwheels?
Hi Linda, here's a video showing you exactly how to make pinwheels.... have fun!
Use electric can opener on both ends of the can. Clean and paint with coloured pin whirl starting in the middle and moving round and round until you reach the edge leaving a gap between your paint. Do this on both sides of the lids. Use different colours or two colours on them. When dry, Punch a hole through the middle and file or hammer smooth. Thread on cord or nail to a post. Hope that helps.
Hi Linda. This might help... https://www.instructables.com/id/Pinwheel-From-Soda-Cans/
Hi Linda, hope this video helps you with your project of soda can pinwheels. About 892,000 results (0.52 seconds)
Suggested clip · 113 seconds
www.youtube.com › watch
Hi Linda: First of all, wear gloves and glasses and be very careful:) Check these sites out for ideas:
Here's an idea:
Here is a video tutorial for you: https://www.youtube.com/watch?v=VAPGCQ4X6KY
A larger version here:
This will show you how: https://www.youtube.com/watch?v=4hgAqJJTqis
Try this: https://www.instructables.com/id/Soda-Can-Pinwheel/