Outdoor Wooden Ring Toss

6 Materials
$30
1 Hour
Easy

Summertime lawn games are one of the best parts of summer. Sunshine, hanging out with friends, and passing the time by tossing things back and forth. What's not to love?!

Tools & wood materials


Tools needed for this project:


  • Mitre saw or skill saw
  • Wood glue
  • Brad nailer
  • Power drill
  • 1" spade bit
  • Heavy duty scissors
  • Painter's tape
  • Paint or gel stain


To make 2 ring toss stands, you will need:


  • 1"x3"x8' lumber x 3 (cut 4 pieces @ 30", cut 8 pieces @ 13.75")
  • 1"x6' dowels x 2 (cut 8 pieces @ 12", cut 2 pieces @ 18")


*Note: This photo shows the wood cut for just 1 ring toss stand.

Ring materials


To make 6 rings, you will need:


  • 1/2" manila twist rope x 9' (cut 6 pieces @ 18")
  • Colourful electrical tape
  • Duct tape (or in my case, medical tape, since I couldn't find the duct tape)


Make a circle with each piece of rope and use duct tape to hold the ends together. Decorate however you'd like, making 3 of each colour combination.

Making the stands


Each leg of the stand is going to be 2 boards thick and have a gap in the middle for the other leg to sit/interlock in.

Lie your 30" board down and place 2 of the 13.75" boards on top with the ends lining up with the bottom board's ends. There will be a 2.5" gap in the middle.

Glue & brad nail together


I used wood glue, then brad nails to hold the boards together.

Ring toss legs


This is what your legs will look like when completed. The top legs will be flipped over and interlock with the bottom legs.

Drill the holes


Drill the holes using your 1" spade bit. There will be a hole on each end of the legs and 1 hole in the middle of the top board. I made these about 1" deep.

Paint or stain


I made a pattern on my pieces to indicate the points for each pole. 2 of the 12" poles are worth 1 point (1 stripe), 2 of the 12" poles are worth 2 points (2 stripes), and the 18" pole is worth 3 points (3 stripes). I also taped of the ends of the legs to coordinate with the poles that will go in them.

Use either a gel stain or paint with the painter's tape. A regular stain will bleed under the tape and will not leave a clean stripe. You can also use the colourful electric tape to create patterns as well.

Enjoy!


I'm not sure what the real points are for ring toss, but we decided on using 1, 2, and 3 points for the poles and the first team to 21 points wins!

.

.

.

For more ideas and ongoing projects, follow along on Instagram and Facebook!


Insta: @farmhouse.ongunnshill

Facebook: Lauren Ann Design


~Lauren icon

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  1 question
  • A do it yourselfer A do it yourselfer on Jul 10, 2020

    What size are your rings? I don’t see anything telling you how you made those and the diameter.

Comments
Join the conversation
3 of 6 comments
Next