How to Acid Stain a Concrete Floor

Brooke Jones
by Brooke Jones
8 Materials
$100
24 Hours
Easy

To me, doing acid stained flooring in a basement just makes sense. The concrete is already there, so it doesn’t take a ton of work to create a nice looking floor. Also, basements are an area of the house that are at most risk of flooding. With concrete, you don’t have to worry about any potential water damage to your flooring.


It’s a very straight forward process, and in this tutorial, I’m going to teach you just how I did it.


For more helpful DIY tutorials, head over to Plank & Pillow.

Clean the Concrete


When acid staining concrete, it’s extremely important to clean the concrete very well before doing anything else.


I started by scraping any dried drywall mud and paint off the floor. Then I used a vacuum to remove all of the dust, dirt, and debris.


Then in a bucket, I mixed some soap and water and mopped the entire floor. Then mopped it two more times with clean water.

Etch the Concrete


The second step in the process is also very important. I applied a special etching solution to the concrete. So what exactly does this do? It basically opens the pores of the concrete to allow the stain to get down into the surface.


I mixed the etching solution with 4 parts water in a mop bucket and applied it to one 10 x 10 ft section at a time.

Then I scrubbed that area with a bush and let stand for about 5 minutes. 


Since the etching solution will leave a chalky residue if you let it dry, I rinsed and cleaned each section before moving on to the next.


I repeated this until the entire concrete floor was done.

Apply the Acid Stain


After I had cleaned and etched all of the concrete, it was time to apply the stain. For this, I used two garden sprayers. Any kind will do. I filled one up with clean water, and in the other one with the acid stain.


I chose the color Graphite, which is a warm gray. I really like the subtle color that it adds to the concrete while still keeping a natural look.

Again, I worked in 10 x 10 ft sections. Using the sprayer filled with plain water, I dampened the section I was working on. The key here is to only dampen the surface without leaving any standing puddles. This will help prevent acid burn.

Then using the sprayer filled with the stain, I sprayed it on in a back and forth motion until that section was covered. I repeated this process across the entire floor.

Clean and Neutralize


I let the stain do its thing for 24 hours. When I came back, I mixed 1 part degreaser neutralizer with 4 parts water in a mop bucket and used it to clean the entire floor.

This removed all of the acid residues while also neutralizing the acid. After I mopped the entire floor with the neutralizer, I went over it a few more times with clean water.

Seal the Floor


After cleaning the floor one last time, I let it dry for another 24 hours. Once it was nice and dry, I applied sealer to the concrete.


I opted not to use a solvent-based sealer because of the harsh order. And I like the satin finish that the acrylic sealers produce.


I poured the sealer into a paint pan and applied it using a regular paint roller on a pole. In total, I applied three thin coats, letting each coat dry thoroughly before applying another.


For more helpful DIY tutorials, head over to Plank & Pillow.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Brooke Jones
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 4 questions
  • Rebecca Elrod Rebecca Elrod on Nov 19, 2020

    Did you dilute the Graphite stain any?

  • Shena Winslow Shena Winslow on Jan 04, 2022

    I was told I would have to move out for a few days due to the acid. Did you wear a respirator?

  • Carolyn Klein Carolyn Klein on Jun 11, 2022

    How would this stand up on an outdoor concrete patio?

Comments
Join the conversation
 3 comments
  • San87tx San87tx on Jul 23, 2020

    Good job!!


    your are one of my top 3 people I always check out Projects on!

  • San87tx San87tx on Jul 23, 2020

    My top 3 people I always check out projects on:


    brooke Jones, corine mapes, and lia with southern yankee DIY

Next