I have a vintage executive desk that has a strange material inlay. I would like to paint the entire desk but the material is pitted and marked and needs repaired. Does anyone know what this material is and how to work with it? Removing it seems like a lot of work for this beginner and I would prefer to fill the cracks/pits and paint. I don’t want to ruin a beautiful piece of furniture.
You can paint leather, which is the most likely material. Consider trying to restore it with automotive leather restoration kit. I think the pits would give it depth and character.
Hello, It’s hard to see from the picture clearly -it looks like it has some dings and damage perhaps removal might be the best option. If not it could be restored and possibly a safety glass covering might help the surface be smoother.
I have a small leather insert on my desk. It just lifts out (maybe a small screwdriver inserted at the edge to pry it up enough to grab it. Your leather may be fastened in place from below. Others have given good restoration hints.
I was gifted an old table that has not been taken care of. There are areas of stains (coffee and water) in the top veneer. There are other areas where the veneer is... See more
I just got this great hutch and my husband and I have a difference in opinions. I would like to paint this as an accent piece and he likes the wood color as it is.... See more
I want to redo this sofa table with a white washed look. However, the glass on both of the shelves is missing. I don’t want to replace it with glass because of the... See more
Hi. I have a patio table that is in great shape, except for the 6 "table rim clips" that are disintegrating. The part is approx 2 1/4 X 1 1/2. The molded "cup"... See more
I have several old bentwood chairs and they are all creaky and wobbly. Some worse than others. I originally thought it would be easy to just strengthen them with... See more
Hi there:Wondering if anyone has tried the new Rust-Oleum Outdoor Fabric Spray Paint yet? Trying to decide if it's a better alternative than buying new covers for my... See more
I have a mirror stand that the paint is peeling off of it. I was trying to sand it down by hand with the 220 sandpaper I was wondering if I would be able to send it... See more
My dining table has white and sticky spots from using a hot pad under a hot dish. The pattern transferred to my table. Tried wood cleaner but it needs finishing... See more
I have a very old desk that is in great condition except for the top. It is that old, hard rubber and it has a lot of dings and gashes (for lack of a better term). I... See more
The ottoman is in my living room. The bottom 2/3 is tan vinyl and the top 1/3(attached cushion) part is leather. Don't know if the paint will adhere well over time... See more
Help/Suggestions needed. After stripping, sanding, little bit of bleach, and pre-stain wood conditioner I have a wood table with 3 different colors and possibly a... See more
Going through my late mother's stuff, found many packs of 3-Hole punched plastic edge strip magazine holders for ring binders. As I do not get any magazines, looking... See more
We bought a new bedroom set for our little granddaughter who has bad allergies but she can’t even sleep in her room due to the strong odors coming from the furniture.... See more
I found this chair sitting on the street after some neighbors moved out. It had a badly damaged rattan seat so I removed that and had a handyman cut this bottom for... See more
Renee: since it's a desk, you may want to simply look for another leather or pleather desk cover.
You can paint leather, which is the most likely material. Consider trying to restore it with automotive leather restoration kit. I think the pits would give it depth and character.
You could replace or paint it. Then have a piece of glass cut to protect it?
Hello, It’s hard to see from the picture clearly -it looks like it has some dings and damage perhaps removal might be the best option. If not it could be restored and possibly a safety glass covering might help the surface be smoother.
I have a small leather insert on my desk. It just lifts out (maybe a small screwdriver inserted at the edge to pry it up enough to grab it. Your leather may be fastened in place from below. Others have given good restoration hints.
You can make the leather top look a lot better by applying Old English Furniture Polish to the top of your desk, then buff well.
Here's a video I found about how to totally reline the top, if you choose to do that instead.
https://www.youtube.com/watch?v=aQDSUQcnOv0
I really like the idea of the picture you included that shows a map. That is my style.
Here is some info for your desk repairs
https://www.pinterest.com/pin/323977766917469394/
https://www.pinterest.com/pin/552605816748558939/
you could always cover it with a wood piece that you could paint or stain as well
I would just find something to replace it, add a piece of wood and stain it or paint it, or get a piece of stone for the top.
Is that leather or old soapstone? It looks like an old lab desk from a chemistry lab..... I know I had a few. https://www.doityourself.com/stry/how-to-repair-scratches-in-a-soapstone-countertop
I would not go there ... I would simply painted or resin coat
Home and Garden DIY Ideas | Hometalk