Easy Board and Batten Tutorial for a Small Entryway

5 materials
$75
4 Hours
Medium

Board and Batten has a way of adding charm and personality to an otherwise rather boring space. Being that it is wood, the costs to add these updates are minimal. Plus, when they are placed in the right areas, provide a ton of not only functionality, but style as well! If you are looking to add this gorgeous feature to your entry space, or mudroom, or any smaller area of your home, follow this tutorial!

Entry way Before

My entryway before was cute, but lacked functionality outside of the bench. My son keeps his shoes in the bench, but had no where to drop off his lunch bag, I had no where to put my purse of quickly throw my light jacket. Then I had an aha moment! I could duplicate a similar board and batten pattern from my living room into this hallway and make my entry foyer into a small mudroom.


Once I made up my mind, I didn’t over think it. I headed straight to the store and purchased my supplies for this super easy project!


Tools Needed:

  • 1×3 unfinished common board (They were out of the pre-primed) for the horizontal pieces
  • 1×2 pre-primed common board for the vertical pieces, and to trim beneath the crown molding, above the baseboard, and along both sides of the wall
  • White Caulk
  • White paint (used what I already had on hand)
Remove old floating shelving

I started by removing the old floating shelving in this space . Once removed, I repaired the holes using wall repair spackle and framed out the wall using 1x2 pre-primed wood strips.

Attach board and batten pieces based on your specific measurements

Next, attach all of your pieces to the wall based on your specific measurements, all within the frame that you created with the 1x2's. This part may differ based on the height of your ceilings and width of the space you’re making your board and batten wall on. My vertical pieces are approximately 14 inches apart.

Add Horizontal Pieces

Next, add horizontal pieces in between each vertical piece. These pieces should fit in between the vertical pieces. I used 1x3's for the horizontal pieces and spaced based on my preference.


After attaching the pieces using my Ryobi Power Nailer ( you can use hammer and nails, but it will take a lot longer. You can also Gorilla Glue), caulk where all of the seams of the 1x2's and 1x3's and the wall meet.

Paint

After caulk has been applied where needed, then paint desired color. Mine is painted Simply White color matched to Behr paints. It took around four coats to get it fully covered.

Let dry and style as desired

I added multiple hooks because I needed it to be a space to hang coats, purses, etc.


I hope you are inspired to tackle this project on your own! Make sure you visit my blog for more DIY inspiration!

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Erin | Live Pretty on a Penny
Want more details about this and other DIY projects? Check out my blog post!
Go

Questions on this post

Have a question about this project?

Your question...
  2 questions

Comments

Join the conversation

3 of 18 comments
Your comment...
Next