cover a wire pumpkin frame with rope cording
Hi Linda, is your question pertaining to a specific post you saw? If so, you can ask your question directly on that post and the writer will be able to answer any questions you have :)
Isn't this gorheous!
Hello using a glue gun might be an option.
Heres a link to a recent hometalk project
Hi there Linda. My name is Cindy. You will want to cut an end of the rope so that it is even. Then place a small piece of scotch tape around the end. Doing this will eliminate the end of the rope from fraying. Using a glue gun start by gluing the prepared end to the bottom of the frame. Wrap the rope until you reach the top. Be sure to add glue every 3 or 4 inches or so. When you get to the very end, cut the rope but leave an inch or two on it. Fold it under itself and glue it down. Good luck Linda.
Here you go:
There are some great pumpkin frame projects here: