Live Edge Spalted Maple Table.

4 Materials
$900
4 Weeks
Medium

Earlier this summer we sold our house and moved into an apartment in downtown Kalamazoo. We sold most of our existing furniture, including our dining room table, and six chairs. We decided to make a table to fit the new space.


The base is made from 1” diameter black iron pipe and utilizes standard fittings, flanges, pipe/nipple lengths, and casters . It makes the table height (36”) hence the stools are interchangeable with the table and our island.

It was spray painted with Rustoleum’s black primer and high temperature paint. The heat protection isn’t necessary but I like the uniform finish the high temp paint provides. A final coat of satin spray polyurethane provided the gloss we desired.

The base.

The top is spalted maple. Spalting is caused by a fungus that invades certain species of wood and adds significant character to the grain. Left too long to spalt, logs will decay. 

My wife chose two eight foot lengths of eight quarter, each about 16 inches wide from RSL Hardwoods, a local speciality lumber supplier.  Total for the slabs approached $400. 

Rough cut slabs

If you look at some of my previously posted projects, I have made and repurposed a number of tabletops. Since we were deeply immersed in a major downsizing and relocation, we opted to have the slabs book matched, jointed, and planed, by Woodsmiths, Inc., a local custom millwork/cabinet shop. The cost was about $350 and worth every cent, considering they hit every target (6ft long, 28-30 inches  wide, and planed to 1.5 inches thick)

There is a company in Missouri (Elmwood Reclaimed Lumber) that sells awesome tabletops

Tabletop after millwork.

The end checks, knots, and a few rough areas were filled (twice) with two-part epoxy that was tinted black. After hardening the epoxy was sanded, starting with a belt sander (80 grit) and then an orbital sander, 100 and 120 grit. 

Filled with epoxy.

The top was sealed with amber shellac and stained with dark walnut stain. After it dried, it was lightly sanded (150 grit) then re-stained with golden oak. 


Multiple coats of oil based satin polyurethane gave us the protection and gloss desired. 

Sanded, sealed, and stained.

The table was finished about a month after we moved into the apartment, but we had to wait several more weeks for the stools to arrive. The casters allow us to easily use it in different  configurations, seating 4 or 6.

Finished table with stools.
Finished table.

The whole project, especially when you include the stools, was quite pricey. But it was what we envisioned, wanted, and likely the last dining set we will own. 


Thank you for your interest.

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

30 Adorable DIY Ideas For July 4th
3 Brilliant Ideas How to Use Photo Frames
31 Update Ideas To Make Your Kitchen Look Fabulous
30 Creative Ways To Repurpose Baking Pans
Here's How You Can DIY The Hottest Home Decor Trends of 2018
The Easiest Ways to Grow a Bumper Crop of Tomatoes
Spruce Up Your Plain Lamp With One Of These Great Ideas

Have a question about this project?

3 questions
  • Sally
    Sally
    on Oct 8, 2020

    Love the table!!! But love the chairs also--where did you get them?

    • John Biermacher
      John Biermacher
      on Oct 8, 2020

      We purchased them from Talsma Furniture, a local furniture store. They can be found on the Internet by searching “Gatlin Swivel stool”.

  • Cathryn Pratt
    Cathryn Pratt
    on Oct 15, 2020

    Do you have a shopping lists for the plumbing pieces required for the base? We would love to make a similar table in Brockville, Ontario, Canada. Thanks so much, Cathy.

    • John Biermacher
      John Biermacher
      on Oct 15, 2020

      I will be happy to help, but unless you plan to make the exact size table, I can only provide you with the fittings required and you will need to adjust the lengths to fit your needs. Do you plan to make it-

      30” high (standard table height)

      or

      36” (buffet height)?

  • Cathryn Pratt
    Cathryn Pratt
    on Oct 16, 2020

    John, Thank you so much for your quick response. We plan on building a table, counter depth of ~25", counter height of ~35" and width of 72" I hope you are able to easily provide a list of the plumbing pieces required. Thank you again, take care and stay safe. Cathy from Brockville, ON, Canada

    • John Biermacher
      John Biermacher
      on Oct 18, 2020

      Maybe this will help

      stretcher: two 24” nipples (pipe); and a coupler

      ends:

      eight 90 degree elbows;

      eight floor flanges

      six tees;

      six short (close) nipples; and

      four casters and four nipples *.


      (*) the height of the casters, the length of these nipples, and the thickness of the table top will work out to make your table 36” height.

Join the conversation

3 of 11 comments
  • Jody
    Jody
    on Oct 8, 2020

    So very pretty. You people who can think of the things all I can do is copy are so amazing.

    • John Biermacher
      John Biermacher
      on Oct 11, 2020

      Jeanne and Jody,

      Thanks for your support. Almost every project is usually a variation on someone else’s project. I have had a lot of compliments on my repurposed pianos, but I studied lots and lots of internet photos as part of the process.

  • Dasana101
    Dasana101
    on Oct 8, 2020

    Lovely!

Your comment...