How to Make Your Own Fall Front Porch Sign

6 Materials
$0
2 Hours
Easy

Tall, wood porch signs are so popular right now, and I really wanted one to decorate my front porch for fall. I’ve seen them in so many different places, but could never convince myself to buy one, because I would always think to myself, “That would be so easy to make myself…"


Well, I finally got around to doing it! And I was right– it WAS so easy! Even better, I did not spend one single dime making it! I used stuff I scrounged up from around the house. This project was free, fun, and turned out fabulous.


Let me show you how you can make your own.


The Wood

This 107″ long scrap of cedar was left over from the construction of our deck two years ago. It has been sitting outside, exposed to the elements since then, which gave it this wonderful, weathered barnwood gray coloring on one side!


The other side was still a golden cedar color, which gave me a great idea: I could use both sides, and have a reversible porch sign for more than one season, with two very different looks!


Plus, as an extra bonus, this piece of wood was long enough to cut in half, giving me enough wood to make reversible signs for 4 different occassions!


I used this piece of cedar, because it was free and available, but you can totally use whatever you can find. My finished sign measures 53.5″ x 12″ , but that’s not written in stone. That’s the great thing about making your own–you can customize it to whatever size works for your purpose, or whatever piece of wood you can come up with.

And don’t worry about the type of wood. Anything will work for this, especially if you are going to paint it.

Choose Your Finish

I decided to leave the weathered gray side alone, for another sign, which I will add to the back later.


For my Fall Porch Sign, I wanted a distressed white color, so I flipped my board over to the cedar-toned side, and got out my quart of  General Finishes Alabaster Milk Paint, which was leftover from a previous project.

Because I didn’t want a solid white paint job, I used a chip brush, and dipped just the edge of the bristles in the paint, gently dry-brushing it on. I made sure to leave plenty of the wood and knot holes showing through.

Lettering

If you have stencils, or a Cricut, you could do this part quite easily. I don’t have either, so I used my tried-and-true pencil tracing trick.

I printed out the lettering that I wanted on regular printer paper. Then, I laid it out on the wood to make sure it was in the arrangement and spacing that I wanted.

Next, I flipped the paper over, and using the side of my pencil, I shaded on a heavy layer of pencil lead on the back of each letter.

Then, I positioned the lettering how I wanted it on the wood, and traced over it using firm pressure.The lead will transfer onto the wood. I found it worked best to use a mechanical pencil without any led for my tracing, as it allowed for a firm pressure, without the lead tearing the paper.

Outline Your Letters

Once the letters were transferred onto the wood in pencil, I used a Sharpie to outline them. This ensured a nice clean outer edge to the lettering.

Fill In With Paint

A small foam brush with straight edges worked best for my block lettering, because I was able to dip just the edge of the foam brush in the paint, and gently dab it along the straight lines of my letters, before filling them in.For the “Oh, hello” lettering, I used a tiny watercolor brush.

Optional Elements

At the bottom of my sign, I added a rustic pumpkin using the same print- and-trace method. Again, I outlined it with a Sharpie (this time silver) and shaded it in with colored pencils! Yes, colored pencils.


Because my sign is going on a covered front porch, and won’t be exposed to the elements, the colored pencils worked great. They allowed me to shade where I wanted to, while still allowing the distress of the wood below to show through.


If you’re going to have your sign someplace where it will be exposed to weather, I’d definitely spray the finished project with a clear coat sealer.

Time to Decorate!

I used a couple of wood slices under my sign, to give it even more height. Then I accesorized with things I also dug up from around my house. Other than the mums and the pumpkins, I didn’t spend any money on this project.I still have the gray, weathered, back side of this sign to create something else later. Maybe for Christmas? Or maybe just a “Welcome” sign that can be used any time of year? So many possibilities!


Happy Fall Decorating!

-Niky @ The House on Silverado


Visit my blog to see my whole Cozy Fall Front Porch, including my DIY sign. 🍁

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

12 Christmas Home Tours You're SO Going To Fall For
15 Pieces Of Furniture That DIYers Built From Scratch
15 DIY Projects That Will Make You Say "WOW!"
Grab Some Pool Noodles And Copy These 3 Ideas
Browse Through These Dream Bedrooms & Find Your Favorite!
30 Address Signs That'll Make Your Neighbors Stop in Admiration
Use Your Old Corks For These 25 Clever Ideas
Niky | The House on Silverado

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

2 questions

Join the conversation

2 of 22 comments
  • Shannon Archer Mooney
    Shannon Archer Mooney
    on Oct 24, 2020

    This is just an AWESOME job!! Like you, I too find it hard to spend the money for a ready made sign. Taking your tips, I am going to attempt this!! Thank you so much for the tutorial!!

    Happy Crafting friend!

  • Susan Cline Myers
    Susan Cline Myers
    on Oct 27, 2020

    Just a suggestion - paint an orange or red fall leaf instead of the "A". I made a sign for my porch that says "Give Thanks", and substituted a turkey for the "A".

Your comment...