DIY Pantyhose Concrete Pumpkins

12 Materials
$15
2 Days
Easy

Making these DIY Concrete Pumpkins is so easy! All you need is some Mortar Mix, stockings or thick pantyhose, a bucket, twine, and some eye/face/hand protection. The bag of mortar mix was $7 and I had all the other materials on hand. I was able to get 13 concrete pumpkins with concrete left to spare! I hope you'll come check out my BLOG for more fun DIY projects and decorating ideas (blog subscribers always get first access!) ;)

Aren't they so cute?! Let's get started!

Step 1:


Cut your pantyhose/stockings into 5 sections. (Note: Using thicker stockings/pantyhose is better because they will be easier to remove). First cut the body portion off the top and tie it off on one end. Then cut two sections out of each leg and tie them off on one end.

Step 2:


Add about 2″ of water to a large 5 gallon bucket or something similar. Scoop your mortar mix into the bucket and mix. You want your mixture to be pliable and wet, but fairly thick (not runny at all)! Make sure to wear a mask, eye protection, and gloves for this project!

Step 3:


Scoop your concrete into your stockings. Use your hands to mold the mixture inside your stockings so it becomes a flatter round shape. Don’t stretch the stockings too much, or they will be difficult to remove.

Step 4:


Tie off the top of your stockings and ensure the knot is not pressing too deeply into the top (if it is, it will create a large divet that will be harder to fill with a “stem”).

Step 5:


Tie pieces of twine around your concrete pumpkin to create ridges. Tie them tight enough so it creates a decent indentation, but not so tight that the concrete will dry around the twine and get it stuck. Allow to dry for 24 hours. Then use scissors or a utility knife to cut away the twine and remove your stockings. There will be a lot of fine concrete dust released, so again, gloves/mask/eye protection! Hose down your concrete pumpkins and allow to dry. Then pray your pumpkins with a clear matte polycrylic like Krylon. This will keep them from shedding additional concrete dust.

Step 6:


Add stems! I used rope but you can use really anything you like – sticks from your yard, yarn, wine corks, anything! Secure the rope or whatever you’ve decided to use with hot glue. I also left a few pumpkins stemless so I could more easily stack them in my decor.

Step 7:


Allow to dry. I recommend adding felt “feet” to the bottoms of your pumpkins (especially the larger ones) to protect your furniture from scratches!

And that’s it! Easy and adorable DIY concrete pumpkins for very little money! If you make these, let me know in the comments below how they turned out! I bet you’ll love them and want to make more! Hope to see you over on the blog in the meantime!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Ana Ochoa - Sunrise Valley Farm Co.
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • Lisa West Lisa West on Oct 12, 2020

    I wonder if we could use spackle or wall mud, or something similar to make these pumkins. They are so cute. I bet painting them would add a nice pop of color to. I love these. Thank you for sharing.

Comments
Join the conversation
4 of 14 comments
  • Richglymph Richglymph on Oct 06, 2022

    Awesome money saver! What’s the purposes of the drill and I guess that’s a mixer...do I NEED those

    • You don’t need it, but the drill and mixer attachment makes it MUCH easier to mix the concrete well and quickly! Definitely not needed though, just be sure you have something very sturdy to mix with by hand if you go that route


  • Patty Patty on Oct 10, 2022

    The drill is to make a hole For your stem maybe a stick. No need For mixer as you can stir with paintbstick.

    • the drill was used to mix the concrete. its much easier and faster than trying to mix with a paint stick. And no need for a hole for the stem, you can just glue the rope right on!

Next