For this project i used such tools:

- Dremel Moto Saw

- Screwdriver

- Speed Square (Aluminum)

- Engraver Mini Electric Drill

I used different types of wood:

- Pine

- Оak

- Birch-tree

At first i print picture and cut it on pieces. 

Then I redraw the outline of the details on a wooden Board.

My little daughter helps me drawing ;)

Now we will be cutting pieces. I used Dremel Moto Saw. 

It's really easy to use, so even my little daughter can use it. I help her to cut little pieces. She is my little helper and always want to try my tools ))

When we cut all pieces, we checked how it is look like in real. Looks pretty fun. But the corners are not smooth, so i have to sand everything. 

For this purpose i used screwdriver and polishing disc. 

After sanding, all the faces became smooth and flat.

Now I mark where the eyebrows and nose will be located. I circle the places with a pencil.

With the help of an engraver, I made a recess in the Board.

Then I'll stick eyebrows and nose in there.

I used a chisel to make grooves. I'll put bear ears in them. 

Then I added some PVA glue, pressed it with clamps, and left the glue to dry.

Also, using PVA glue, I glued the bear's eyebrows and nose

Now I need to make a stand. I will use an 8 mm thick aluminum tube. I drilled 2 holes. 

One at the head, one at the base. Cut the tube 10 cm long.

Cut the tube 10 cm long.

Almost everything is ready. We just need to cover the eyeglass holder with oil and glue the eyes.

I also glued the tube.

That's it! Our eyeglass holder is ready. She looks really cute! what do you think? Write in the comments who it looks like more a bear, or a dog?

So friends! Thank you for watching my post. I hope you enjoyed it!

See you soon! :)