How to paint/repair chips on sa fiberglass tub?

If the chips are the fiberglass itself you would need to replace the tub. If the chips are just the clearcoat finish you can refinish the tub with a tub and tile paint kit.

Hi Mary

Here are some ideas for you

https://homeguides.sfgate.com/repair-small-surface-chip-fiberglass-tub-88397.html#:~:text=Fiberglass%20tubs%20are%20generally%20durable,with%20a%20waterproof%20epoxy%20paint.

https://www.homeadvisor.com/r/fiberglass-shower-repair/

As William said, if it's just the coating finish, you can purchase a patch kit at your local home improvement store.

Here's a post that might help - https://homeguides.sfgate.com/repair-small-surface-chip-fiberglass-tub-88397.html#:~:text=Wet%2Dsand%20the%20filled%20area,dry%20before%20using%20the%20tub.

Hi Mary, hope this helps you out,

https://www.youtube.com/watch?v=Z9vXRqCmbyg

You can also use Appliance touch up or automobile touch up paint.

Thank you - I will go through all these suggestions.

And this one sounds really simple - this might be the answer I need.

Hello. A photograph might be helpful to see the actual degree of damage you have. I tend to agree with the post above to try some appliance epoxy paint.

It be enough to fill a small chip. I have use this paint on white kitchen cabinetry scratches and knicks and find its quite effective.

I did have a problem with my fiberglass tub having tiny hairline cracks in the bottom base I repaired it with the epoxy putty and painted it over although it wasn’t a perfectly disguised repair it got me through a period of time until the tub was replaced with complete bathroom reno.

How to fix chips in acrylic bath tub?

https://www.hometalk.com/diy/repair/furniture/q-how-to-fix-chips-in-acrylic-bath-tub-34010701#!

Check at your local hardware or home improvement store for a repair kit.