Custom Holiday Charger Plates With Fabric

5 Materials
$10
5 Minutes
Easy

Tired of spending a lot of money on charger plates? Here is an inexpensive & amazing way to create custom holiday charger plates from fabric! This is an easy craft with big impact. It takes about 10 minutes, and will spice up your holiday table into a gorgeous masterpiece.

Clean plastic free of any lint that has accumulated.

Place plate upside down on top of fabric.

Using the white colored pencil, trace around the diameter of the plate, leaving a 1-inch allowance. With the scissors, cut along white line.

Before spraying with the spray mount, make sure you are in a well-ventilated area. If you are spraying inside, I recommend using a larger sized box as a backdrop, and placing the plate(s) in the box to spray.


Spray the front of the plate in even strokes, fully covering the plate with adhesive.

Place the material, right side up, on the plate. Carefully rub the fabric, getting out all wrinkles and bubbles, if any, creating a smooth surface.

Once the fabric is smoothed out, turn plate over. With the scissors, cut along the rim of the plate, to cut off the excess fabric

Let dry in single layers before stacking.

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

Check Out These 30 Incredible Floor Transformations Ideas
30 Fun Way To Brighten Up Your Backyard This Summer
15 Memorial Day Crafts
31 Amazing Furniture Flips You Have to See to Believe
27 Wonderful Ways You Can Use Scrapbooking Paper
25 Impressive Ways You Can Update Your Ikea Purchases!
15 Awesome Projects To Get You Ready For St. Patrick's Day
Brooke Fedigan

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

2 questions
  • Hope
    Hope
    on Nov 19, 2020

    What is that gorgeous, colorful beauty on top..? It looks oriental to me but...so pretty!!!! : )

  • Janet
    Janet
    on Nov 19, 2020

    Do you think you could pull the fabric off and change it for a different occasion?

Join the conversation

2 of 6 comments
  • Flipturn
    Flipturn
    on Nov 29, 2020

    To help prevent fraying of the cut edge around the circumference, I would suggest applying Fray Check, either with a narrow paintbrush, or with your finger.

  • Flipturn
    Flipturn
    on Nov 29, 2020

    To achieve a more even close-cut edge, instead of using scissors, I would recommend using a rotary cutter.

Your comment...