How do I build

Hi Robin, Hope this video helps... https://www.youtube.com/watch?v=n9Fvl2SkGLQ&vl=en

Here are a couple tutorials that might be helpful to you:

https://www.hometalk.com/12329511/built-in-banquette-tutorial

https://www.hometalk.com/28501944/built-in-kitchen-banquette

Perhaps this will help:

https://oheverythinghandmade.com/how-to-build-a-kitchen-nook-bench/

Here is a great video on building a banquet

https://www.youtube.com/watch?v=n9Fvl2SkGLQ&vl=en

Here are some more ideas:

https://www.homedit.com/breakfast-nook-bench/

Hello. There might be some ideas in these home talk links hope this helps.

https://www.hometalk.com/search/posts?filter=Bench%20kitchen%20

Hello,

Two ways, 1. Mitre the corner of the benches to fit together or 2. Fit one bench right into the corner and Butt the other one up to it, or shape to fit if not square. Best wishes.

Hi Robin, hope this help you build benches for your nookEasy to build diy breakfast nook

1. measure the area where your bench is going to be installed.
2. Make sure you choose a comfortable height for your bench.
3. cut your 2×4's, and use a Kreg jig to make vertical holes for your screws.

oheverythinghandmade.com › DIY

Search for: How do you make a corner nook bench?

Hi Robin: Here's a site that should help:

https://www.diycraftsy.com/diy-corner-bench-ideas/

I would build them with storage so basically a box. After building a window seat with a hinged lid, I wish I had them open in the front rather than the top. I would have much more use for them. The design I'm thinking of is an open box, turned on the side. Something like this:

https://www.potterybarn.com/products/modular-banquette-set-gray/?catalogId=84&sku=3758179&cm_ven=PLA&cm_cat=Google&cm_pla=Furniture%20%3E%20Dining%20Benches%20%26%20Banquettes®ion_id=772240&cm_ite=3758179&gclid=CjwKCAiA2O39BRBjEiwApB2IkhcRbCrfeWZH33xN1YGrejknmZktbPKn_n_YYQuNhDo7Hvyb4sqRIhoCxMcQAvD_BwE

Hi Robin

Here is some info for you

https://www.youtube.com/watch?v=vOAsDJz5_GY

This is a helpful video on how to build a bench: https://youtu.be/Rc6VGDvtarI

This is another video tutorial: https://youtu.be/7BfquTY8dGA

Here are some ideas: https://www.hometalk.com/search/posts?filter=DIY%20bench

Hi Robin, there are lots of posts here:

Home and Garden DIY Ideas | Hometalk

Here is a good tutorial: DIY Dining Table Bench Seat

We built a curved one from two old straight ones. You could so the same for a corner bench, by mitering the ends of both and joining them.