DIY Leash Holder
Are you tired of look for your dog's harness and leash or having them be in a tangled mess? I made an easy organizer in an afternoon that can hold all my dog's accessories.
Supplies Needed for the Leash Organizer:
Wooden Round (Or you can cut your own)
1" dowel
Paint
Painters Tape
Vinyl decal (optional)
Pick out the paint colors and tape off the wood round or you can leave it natural or stain it. I painted 2 light coats, letting it dry in between. I removed the painter's tape while the paint was still tacky to achieve a clean line.
Dill holes in the wood round, using a 1" bit. Only drill about 3/4 of the way through, so the dowels can sit in the hole. I cut the 1" dowel into equal lengths of 1 1/2" and inserted them into the holes with a little wood glue.
I let the glue dry then I painted the tips of the dowels to match the top shade of paint.
(Optional) You can use vinyl or paint to customize the organizer. I used my Cricut to cut this design out of permanent vinyl.
Hang your organizer by the door with and fil with your dog accessories so you can be ready to walk every day!
Comments
Join the conversation
-
Very cute - this will be helpful for me.
-
If you find that the weight of the leashes causes them to slide forward and slip off, I would suggest that you screw in a knob with a larger diameter, so that the pegs are no longer open-ended.
-
great tip.
-
Frequently asked questions
Have a question about this project?