Cut both in half and attach them side by side. Mount on two pieces of wood that you attach the the baseboard and a horizontal piece between the two post across the back of the 4 shutter pieces. Chalk paint and scuff.
Jan 4, 2016 — Start your headboard by laying it out flat. A queen headboard needs to be about 5ft wide. There is a little wiggle room…the headboard could easily have an extra inch, more or less, on each side. With 2 sets of 3 shutters and 2 4×4's, my headboard wasn't quite wide enough, I needed one more panel.
screw them together to make piece across the head of the bed width, add 2 legs (1x3") downward to fasten to the bed frame and accounting for the height desired, then screw the legs on in two places for sturdiness. Attach your headboard with 2 bolts and wing nuts, and a couple washers on each side of the bed frame.
I love rusty junk. So when I saw this bucket at a yard sale I liked it too much to pass it up. The question now is, what do I do with it? My only thought is to turn i...
See more
Does anyone have any ideas of things to do with empty cat litter plastic buckets? I did take a foam square and covered the bucket and foam with fabric to make a quick...
See more
We now live in a rural area with no trash pickup. I am separating our trash and doing what I can to compost, feed the chickens, burn or store to take to the dump. I...
See more
I am beginning to make a little private garden in my drive. I have no yard but have a small parking area off my drive, plus another entrance. And of course limited in...
See more
Cut both in half and attach them side by side. Mount on two pieces of wood that you attach the the baseboard and a horizontal piece between the two post across the back of the 4 shutter pieces. Chalk paint and scuff.
https://www.hometalk.com/diy/build/furniture/diy-headboard-from-old-shutters-37095753?expand_all_questions=1#!
https://www.hometalk.com/diy/bedroom/furniture/queen-size-shutter-headboard-3772741
https://www.hometalk.com/diy/bedroom/furniture/diy-headboard-shutters-upcycle-4931573?expand_all_questions=1#!
https://www.hometalk.com/diy/build/furniture/upcycled-shutter-headboard-plus-more-36326454?expand_all_questions=1#!
DIY Headboard From Old Shutters
Queen Size Shutter Headboard
DIY Shutter Headboard
Upcycled Shutter Headboard Plus More
Here are some options: https://www.hometalk.com/search/posts?filter=shutter%20headboard
This is one way to make a headboard out of shutters: https://jaimecostiglio.com/h-is-for-headboard/
Could you try something like this except use the shutters rather than old doors?
Hi Chrissy, hope this helps you with your shutter headboard. Headboard made from Salvaged Shutters - Scavenger Chic
https://scavengerchic.com ;› 2016/01/04 › headboard-m...
Jan 4, 2016 — Start your headboard by laying it out flat. A queen headboard needs to be about 5ft wide. There is a little wiggle room…the headboard could easily have an extra inch, more or less, on each side. With 2 sets of 3 shutters and 2 4×4's, my headboard wasn't quite wide enough, I needed one more panel.
screw them together to make piece across the head of the bed width, add 2 legs (1x3") downward to fasten to the bed frame and accounting for the height desired, then screw the legs on in two places for sturdiness. Attach your headboard with 2 bolts and wing nuts, and a couple washers on each side of the bed frame.
Hello there,
Brace them across the back to fit them together or fix them to the wall separately!
Thanks, great ideas. I want to attach it to the bed not the wall. I really liked the one with lights behind. A M B I E N C E!!!
Here's a post that might help https://michellejdesigns.com/diy-shutter-headboard/
Hello, here are a few ideas for you to check out, hope they inspire you
https://www.youtube.com/watch?v=3FrqMepxpKk
These pictures may inspire you:
https://www.pinterest.com/15w12thst/shutter-headboards/