Desk Makeover With Colorwashing & Drybrushing

5 materials
$30
5 Hours
Medium

I found this desk at a thrift store for $15. It was very sturdy and in fairly good condition. It just had a few scratches and general wear&tear. I decided to give it a facelift!

Check out my video tutorial!

Here is the original desk. Or, this is how I got it - after I started working on it, I realized the previous owner had painted it this dark brown color. The original table was an off-white.

I sanded everything with 120 grit sandpaper. I worked a little harder on the top because I wanted to get the finish completely off so the wood grain would show through the colorwashing. I switched sanders because the circular sander wouldn't get into all of the corners of the body of the desk.

I painted everything with three coats of a light gray paint.

For the first layer of the top, I did colorwashing with the same light gray that I used on the body of the desk. I mixed the pain with some water and stirred it very thoroughly. Once the mixture was ready, I used a paint brush to apply the paint. Then I used a clean, dry rag to wipe off the access. The paint becomes very thing after adding water to it, so it really helps to clean up the paint before it causes puddles and dries unevenly.

Once the light gray colorwashing was dry, I did the exact same process with a dark gray. I mixed dark gray paint with water, stirred, applied it with a paint brush, and wiped off the access with a dry rag.

For the third layer, I did a dry brushing technique with the dark gray. I really wanted to have a layered affect and the dry brushing leaves brush strokes that really help emphasize a layered look.

I simply dipped the tip of a paint brush in the paint, then dabbed it on a paper towel. Then I did really light brush strokes across the whole top. I wanted a soft look, so I wiped the brush strokes to remove the appearance of harsh strokes.

*Once this step was completed, I did another layer of colorwashing with the dark gray, to really blend everything together.

**And then the desk top got 3 layers of polyurethane.

For the drawer handles, I used the original round knobs. I sanded them down so that it appeared to have two flat ends. I then used a silver metallic spray paint to give it a new color. These quick and simple steps really made the handles look completely different.

Here is a close up of how the desk top turned out after 4 layer of color washing and dry brushing!

Final look!

As a desk.

As a coffee bar.

Before and After

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Questions on this post

Have a question about this project?

Your question...
  3 questions

Comments

Join the conversation

2 of 3 comments
Your comment...
Next