DIY Dollar Store Candle Holder Using Molds

7 materials
$24
3 Days
Medium

I've got a delightful project for you today. I am going to show you how to take glass candle holders you can get from the Dollar Tree and then, using mastic - also from the Dollar tree - and a mould, we're going to wrap the molded shape around the glass candle holder.


You might not know what mastic is, so let me tell you. It's something plumbers use - I think 🤪. It's also called caulk, which you may have heard of. It's that stuff that you can find in the bathroom that goes around your sink or tub. It's what seals out the water. And I found out that the stuff is amazing for crafting - especially for using it in silicone moulds!


Why - you might ask? Because the mastic casting comes out as a flexible object! That means you can wrap the dried form around curved items - such as glass candle holders 😃, whoo hoo!

Step 1

Paint a coat of frost glass paint over the entire outside of the glass tumbler and let dry.


It’s up to you if you want more coats. I ended up only doing one.

Step 2

Take your tube of mastic and squeeze some into the mould. You can be liberal with the mastic. It’s totally ok if it goes over the top of the mould.


You might be able to find a silicone mold somewhere for cheap, in the disguise of an ice cube tray. Always be on the lookout for turning something into a crafting purpose 👍.

Step 3

Using your finger, gently go over the entire filled mould in a circle. What you’re doing is finding any air pockets in the mastic. When you see one surface, just push more mastic in the area.


Inevitably, you won’t be able to get all the small air pockets out and some will probably show when you take it out, so don’t be disappointed. I think it gives the shape or sort of antiqued look.

Step 4

Use a palette or butter knife to even the mastic on the mould. It’s still ok if some goes over and you get a layer on the top of the mould.

I decided to fill all the shapes on my mould...


So the downside to using mastic is it takes a while to dry. I left mine in the sun, but it still took a couple of days to fully dry. However, the drying time also depends on how thick your mould form is.


You can tell when it’s close to being dry by pressing on the shape. If it’s kinda squishy still, it’s not dry.

Step 5

When the mastic is finally dry, gently pull on the mastic if it’s over the edge. If not, you can bend the silicone mould to get it out.

I got mine out all connected together:

Step 6

Carefully cut the extra mastic around the edges using small scissors, like scrapbooking scissors.

Step 7

Use acrylic craft paint to paint your mastic shape or shapes.

Make sure you paint all the sides and nooks and crannies.

I used multiple shades of colors to look a little more realistic and artistic.

My finished paint job:

Step 8

Place your glass tumbler on a dish towel or something, so it won't roll around.

Step 9

Flip your mastic form on its back and cover the whole thing with epoxy glue or any other glue that works on glass. Check out what crafting glues to use for different projects here.

Step 10

Place the mastic shape on to your candle holder in the position you want.

Make sure all the back side of the mastic is pressed down. You'll probably need to keep your fingers holding it down for 10 seconds in some parts, depending on the mould you used.

Step 11

Once your shape is good and stuck on the glass, spray the whole thing, including the painted glass, with an acrylic sealer.

Now know of a fun crafty dollar store hack you can add to your arsenol. Make sure to share with your friends 😀.

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Heather
Want more details about this and other DIY projects? Check out my blog post!
Go

Questions on this post

Have a question about this project?

Your question...
  1 question

Comments

Join the conversation

2 of 15 comments
Your comment...
Next