Laundry Room Makeover – My First DIY Project That Was a Complete Ren
In my imagination, the house of my dreams had a full laundry room. There would be an area for folding laundry (my number one requirement) and also somewhere I could easily hang all the clothes I don’t want to wrinkle (read: that I don’t want to iron). Like most people, I’m not the biggest fan of doing laundry, so why not at least make it as comfortable as possible, right?
A laundry room makeover was a given
When we found our current home, it ticked ALMOST all the boxes. You can imagine my disappointment when there was no fabulous, full laundry room—only a washer and dryer in a hallway closet. The one good thing about it was that it was upstairs, near the bedrooms. That is, after all, where most of the laundry comes from.
That might have been a deal-breaker if I did not see the potential that presented itself here. To the right of this closet is our master bedroom, which I wrote all about in this post. What I did not reveal in that post, was that that bedroom had a sunroom/sitting area backing the laundry closet. A lovely area with a spectacular view that I knew from the get-go, we would never fully utilize.
This was absolutely perfect! My imagination ran wild with plans of what I could create here. I think our realtor thought I was a little crazy when I enthusiastically shared my ideas for this space on our second or third viewing of the house. (Yes, I needed to see it a few times to be absolutely sure this was THE ONE).
The plan was to build a wall, separating the sitting area from the bedroom. Removing the back wall of the laundry closet, would create a long narrow room, perfect for the laundry room of my dreams. All entirely do-able in my head, but we had to confirm this before going ahead with the project.
Planning the laundry room makeover
I opened up the wall (only from one side) separating the closet and the sitting area. This wall contained all the plumbing for the washer and dryer. If my plans were to realize, these would have to be moved. This was a little too advanced for my plumbing skills, and I called a plumber to quote us for the job. I figured he would also be able to confirm if this plan of mine was at all possible.
The good news was that it was totally possible! We just had to apply for plumbing, electrical and building permits since it was a significant renovation involving major changes in all three areas. My dear husband handled all the paperwork and drew up this cool floor plan, which he submitted with the applications. Green shows new construction and red shows what had to be removed. Luckily the wall we wanted to take down was not load-bearing. It’s crucial to determine this before ever removing any interior walls!
The plumber and I agreed that I would demo up to the point where he could just come in and move the water supply, drain pipe and dryer vent. This was the only labour expense for this whole laundry room makeover, everything else was DIY.
Here you can see the wall opened up, exposing everything that had to be moved over to the wall on the right of this photo. I also took down the two closet doors and their framework.
We had to be build new walls (two short ones forming a corner) to separate the laundry from the master bedroom. Also, where the two closet doors used to be, we wanted a wall with a single door. Relatively easy, straight forward construction. We applied for a construction permit to do this and it was approved.
Stephen (my husband) did all the electrical work. I do not recommend doing your own electrical work without the necessary knowledge and experience. He moved and rewired some of the existing outlets and lighting. He also installed a few new electrical outlets. It was a tricky job for someone who doesn’t do this for a living, but he passed the inspection with flying colours. It was also a great practice run for doing all the electrical work when we start finishing our basement. Posts about this massive undertaking will follow!
A qualified plumber moved all the plumbing for this project. After all three inspections were passed (construction, electrical and plumbing), we hung the new drywall. This was my first DIY project big enough to use several full-size sheets of drywall. I did need Stephen’s help to move those around.
Mudding and taping
Once all the walls were covered, it was time to mud and tape. Not the easiest job if you don’t have the experience, but practice makes perfect. During the process, my work does not look professional at all, but I just keep going until it is perfect, even if it takes ten times longer. It’s a messy job, especially when you start to sand it smooth, but extremely rewarding when it’s all done.
After what felt like endless weeks of work, the walls were finally seamless and smooth, ready to be primed and painted.
Flooring and trim
For flooring, I chose luxury vinyl tiles. It kind of looks like a cement floor and not the usual wood look.
With the flooring installed, I could finish the baseboards and trim around the door.
We kept the appliances that came with the house as they were still in excellent condition. With that in place, I could finally work on my long-awaited folding area! For this, I repurposed a vanity I removed during an earlier bathroom makeover I did.
I only kept the cabinet part of the vanity and got rid of the top. As a replacement, I got a bamboo countertop from Home Depot. I had it cut to length in store.It was only about 18 inches too long. I also stained it slightly darker as the natural bamboo was too yellow.
The cabinets were stained dark brown (like everything else in this house). I decided to lightly sand and paint them. The grey you can see in the photo below is a combination of leftover dark grey and white paint mixed together. I replaced the old chrome hardware with new black door handles.
I built a small shelf to cover the gap behind the appliances. It works great for preventing socks and small laundry items from finding their way back there. I built the hanging rail from galvanized pipe and fittings and mounted it on a piece of wood. It looked better than just the bare rail and this way, I could secure the wood to the wall, anchored by the studs behind the drywall. This makeover meets all my laundry room needs and wants, BUT… there was some extra space in this newly built room…
Added bonus: a craft area
How lucky could I get! In front of the windows, was a corner big enough for a large desk and a chest of drawers to store some of my art and craft supplies. The rest of it has a spot in the cabinets at the bottom of my folding area. As I’m typing this, I am sitting at this very desk, and it is just the most wonderful area to work in. The view doesn’t suck either…
One year after this project, I still love my laundry room and craft area. It was a lot of hard work, but that is how you make your dreams come true.
Edit: another renovation post you might enjoy, is our entryway makeover.