Wall Décor – Chiyogami Paper & Wood

8 materials
$23
3 Days
Medium

I discovered this beautiful Japanese Chiyogami paper while searching for wallpaper to add to a render scene. Originally, I wanted to make a standing decor item with it, but my plan fell through when I realized I needed small diameter metal rods to complete the design. While browsing through an online furniture store, I saw mesmerizing wall hangings made with mirror and metal. That gave me the idea to use the paper for a wall hanging. I felt it would give a classic-looking paper a contemporary style.


Chiyogami paper is silk screened by hand. The pattern I selected is called “Knowledge” and was inspired by Japanese Kimono fabrics. I used decoupage techniques to apply the paper to the wood. When the paper was partially saturated, it did a good job of sticking to the wood without glue on the sides. I used Mod Podge to attach the paper to the body of the circle; however, it may not have been necessary.


Materials

  • 10 inch round wood circle, 5/16″ thick
  • wood veneer edge banding (not pre-glued)
  • Mod Podge waterbase glue, sealer, and finish
  • wood glue
  • sandpaper (800 grit)
  • acrylic varnish
  • masking tape
  • pencil


Tools

  • clamps
  • sponge brushes
  • scissors
  • ruler


Edge Banding Preparation

I bought wood circles a few years ago from Michael’s. I glued three circles together to get a 5/16″ or 8mm thickness.

I determined the length I wanted by placing the banding over the hook I wanted to use. I cut the band into 5/16″ strips. and glued two strips together.

I held the strips together with small clamps and masking tape.

I put the wood circle in the edge banding to check for length. It was too long, so I cut it and glued it together again.


Wood Circle Preparation

Marked circle on paper
Cut 1/2 inch away from circle
Layer of Mod Podge
Wet edges using water and paintbrush.
Turned coated top onto paper.
Smoothed wrinkles
Tore edges after rewetting.
5 coats of Mod Podge, 1 coat of varnish

Construction

I cut a length of edge banding for the top edge of the circle and adjusted it while it rested in the looped banding.

I glued the banding to the circle.

I glued the circle to the looped banding while it was hanging. The parchment paper on the wall is there to prevent glue from sticking to the wall.

Finished!

I debated whether or not to varnish the wood banding. I did not want to darken the wood color and decided not to varnish. I think it will be fine.

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info
Sandra James
Want more details about this and other DIY projects? Check out my blog post!
Go

Questions on this post

Have a question about this project?

Your question...

Comments

Join the conversation

2 of 5 comments
Your comment...
Next