DIY Patriotic Pizza Pan Door Hanger

7 Materials
1 Hour

Today I am sharing this DIY Patriotic Pizza Pan Door Hanger. Take a Dollar Store pizza pan, along with craft paint and turn it into this fun patriotic decor!

Hi Friends! I am so happy to share this easy and inexpensive patriotic craft with you.

With the Fourth of July right around the corner, we are starting to bring out everything red, white, and blue. I love adding little touches patriotic holiday decor around my home…especially when it’s something homemade.

This past winter I was shopping at Dollar Tree and saw a stack of pizza pans. I bought a couple and added them to my ever growing stash of craft supplies, figuring I’d come up with an idea of how to use them. Then, I got to thinking, what if I painted one and added some cute cottage-style lettering along with a little festive ribbon? If it didn’t work out, it was only a dollar, right?

I am happy to share that it did work out and it was as easy to make as it sounds. I am so excited to share this adorable DIY Patriotic Pizza Pan Door Hanger.

To make this DIY Patriotic sign, you need just a few supplies. I was fortunate and had all of this on hand, so I didn’t need to purchase anything.


  • pizza pan (from Dollar Tree)
  • craft paint (I used Warm White and Santa Red from DecoArt.)
  • paint brushes
  • Vinyl Lettering (If you don’t have a Cricut Explore Air Machine to cut your permanent vinyl, you could always use pick up some letter stickers at your local craft store. If you do cut your letting with a Cricut, you will also need a cutting mat and transfer tape.)
  • a piece of jute roping
  • variety of ribbon
  • floral wire
  • glue gun with glue
  • greenery

The Pizza Pan

The first thing you want to do is paint the base of your pizza pan. It took about three coats to cover it completely, letting it dry between coats. I only painted the front of the pan, using DecoArt’s Warm White. This creamy white color is one of my favorites. Then, with a more narrow brush, I painted the rim with DecoArt’s Santa Red. This bold, beautiful color pops against the warm white. Again, it took about a couple of coats to completely cover.

Once the front of the pizza pan is completely dry, flip it over and hot glue a piece of jute on the back. This will be used to hang it. Now that the base is done, let’s decorate!

The Lettering

I am very fortunate that I have a Cricut Explore Air Machine that I received as a Christmas gift. I am having so much fun using it to make personalized gifts like this sweet Customized Pillow Cover. Repurposing some old, dated canvas prints and adding some lettering made with the Cricut, I was able to make these Farmhouse Style Signs for my mantle. But my favorite project is this Easter Bunny Reverse Canvas. It’s amazing what you can do with an inexpensive canvas and a piece of scrapbook paper!

Back to the lettering for this project…

Using Cricut Design Space, I used the fonts DTS Cottage Style and Apple Myungjo to write the text: God Bless America. It’s so much fun to play with fonts and find those that complement each other well!

I did measure the diameter of the pizza pan and kept that in mind when sizing my words.

When I was happy with my lettering design, I welded the words and cut them using the Cricut Explore Air Machine, along with navy and red permanent vinyl.

Once all of the cutting is done, I weeded the vinyl. This means I used my weeding tool from this basic Cricut tool kit to remove the excess vinyl so that I just had the lettering left.

Applying the Lettering to the Pizza Pan

The next step is to use Cricut vinyl transfer tape to transfer the lettering onto the pan. Cut a piece to size, peel off the backing (but keep it for later), and adhere the transfer tape to your lettering, smoothing as you go.

Next, remove the backing from the lettering and place the lettering onto the pan. The grid on the transfer tape helps to align the lettering so it goes on straight. When you are happy with the placement, carefully peel back the transfer tape and replace it on its backing. You can reuse it again!

The Bow

This is the fun part when you can mix and match colors, patterns, and textures. I do like making traditional bows like on this Easy Spring Floral Wreath, but for this bow, I decided to just layer and gather the ribbon like the bow on the Christmas Ornament Reverse Canvas. After going through my ribbon, I chose 5 different red, white, and blue patterns.

Next, I cut two pieces of each pattern, each piece measuring about 5 – 6 inches long. Then I just layered the ribbon, beginning with the thickest.

When I was happy with my pattern, I gathered it and twisted a piece of floral wire in the center. To hide the wire, I tied another narrow piece of ribbon around the center. Lastly, just fluff and trim the ribbon until you are happy with your bow. Carefully hot glue the bow to the front of your pan.

Finishing Your Pizza Pan Door Hanger

When looking at this craft project, I thought it needed a little something more. I decided to add a few pieces of artificial greenery that I had left over from another project. Since some of my ribbon is not wired, I wasn’t loving the way it was hanging. Adding just a few small drops of glue kept it in place.

I am really happy with how this came out.

Now, I just need to decide where to put it.

Should I hang it on a door inside?

Or, maybe on the front door?

I may hang it on my back porch. There, it would be protected from any weather and would go well with my Patriotic Picnic Tablescape. Where would you display this in your home?

Thank you so much for visiting today! I would love to connect with you on Facebook, Instagram, Pinterest, or on the blog!

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
My Family Thyme
Want more details about this and other DIY projects? Check out my blog post!

Questions on this post

Have a question about this project?

Your question...


Join the conversation

4 of 10 comments
Your comment...