Framed Mirror

Christi H
by Christi H
The mirror in our downstairs half bath was installed by the builder and we wanted to update it without removing it and running the risk of damaging the wall. I created a custom look with wood trim and rosettes.
*Options I considered for this project:
We considered removing it but quickly realized that it wasn't worth damaging the wall and it would have been much too expensive.
*Questions and unexpected events that arose during the project:
The only thing I didn't anticipate was the fact that I should have painted the back of the trim. Since it is a mirror, a small part of the back could be seen but i caught it in time and was able to resolve the issue before installation.
* Cost Comments:
This was a very inexpensive project with a big impact.
*My motivation to do this project:
I wanted a custom look without the cost.
*Project Steps:
1. Measure window
2.Select/Buy Trim
3.Cut to size
4.Paint/Stain and desired color BEFORE installing (I used poly also)
5. Attach to mirror.
6. Touch up paint if needed.
Advice:
DO: Use craft paint. It's so much cheaper and if you seal it, it'll be as durable as expensive paint.
DO: Paint the back of the wood.
DO: Use Hot Glue!!! If you get it crooked...and you will...you can pop it off and re-do it. This is also a great project for renters b/c you can remove it before you move.
Materials:
ROSETTES @ 99c each - $0.00
FLAT TRIM @ 45c/ft - $0.00
BLACK CRAFT PAINT @ 1.49 - $0.00
POLY in a SATIN FINISH - $0.00
HOT GLUE GUN - $0.00
FOAM PAINT BRUSH @ .49c - $0.00
BEFORE
The white stripe you see on the side is the reflection of the back that I didn't paint.
AFTER
The painted pieces before attaching them to the mirror.
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
 1 comment
  • 243107 243107 on Jul 24, 2014
    I too wanted to frame my mirror, but as a renter, I decided to use yardsticks and Velcro. I love your frame, it's beautiful. Great job.
Next