My hubby spent an hour at Lowes figuring out how to make this..I love it
Using a 1/2" threaded pipe at each end, slightly bent at the top, drill a hole in the bottom of the kettle and insert 3/8" soft rubber tubing down thru the pipe and close off the bottom of the kettle with a galvanized floor flange . Use a pond pump that will lift water 7-8 ft, follow those directions for it but to place it to the barrell,( which is a large plastic type, we were afraid a whiskey barrell would leak,) drill a hole in the outside lower edge and insert pump tubing, use silicone to seal it, the center is a flower stand and the tray is a old cooking tray.Fill barrel with water, plug it in and woa la.
Top Hometalk Projects
Want more details about this and other DIY projects? Check out my blog post!Go