Recycled Soda Bottle Heart Shaped See-thru Box
Can you imagine creating a beautiful see-thru heart shaped box for your valentine candies or trinkets using a soda bottle, decorative paper plates/cardboard, glue, masking tape and scissors? Everything from the dollar store!
Here's How: Remove the middle section of a smooth soda bottle leaving a closed cylinder shape. Press together the plastic cylinder, creasing one side with the handle of scissors. Press the center of the opposite side toward the crease and make a second crease. Let the plastic open naturally forming a heart shape.
Use the heart shape plastic to trace two hearts from the pattern paper plates and white poster board.
Apply glue to the back of the poster board hearts and attach the paper plate hearts. Cut 1 inch wide pliable decorative cardboard strips to tape around the edges of the hearts using masking tape.
Once the sides are taped on, add clear drying glue around the inside where the heart shape edge and trim meet and let dry completely. .
Remove the masking tape and attach the heart shape top and bottom to the plastic heart.
I made a decorative flower to add on top, using foam paper from the dollar store. I used a scallop edge punch to cut out circles warmed on a iron, shaped and hot glued to a center circle.
These boxes can be embellished with your special trim and filled with anything adorable and cute. So pick out your sweetie's favorite treat and make one for Valentine's Day!
- Decorative paper plates/cardboard trim
- Recycle plastic bottle
- Tacky glue
Want more details about this and other DIY projects? Check out my blog post!Go