Broken deck umbrella pole

+27
Answered
I have an old umbella for the deck. The pole is broken, any ideas to make it stand up?
  28 answers
  • B. Enne B. Enne on Aug 03, 2015
    old clothesline, badminton or volleyball posts?? Check thrift stores.
  • Linda Bridge Linda Bridge on Aug 03, 2015
    Sometimes a shower curtain rod will fit over ---I broke my corn broom handle and a shower rod fits over-- had it now over 7 years
  • Z Z on Aug 04, 2015
    A photo showing how it's broken would help since I know there are knobs/controls for getting the umbrella up and down that could make one idea work and another not.
  • DEBRA MCLAUGHLIN DEBRA MCLAUGHLIN on Aug 04, 2015
    if you broke whole pole agree with linda bridge.. i added a axel , ( think that is what friends son used).. is a round very heavy disk and he put a rod in it about 4 to 6 inches long painted it black.. put my umbrella pole in it.. now nothing can blow it away..
  • Pattie Fox Pattie Fox on Aug 04, 2015
    put it inside a pvc pipe
  • Yvonne Yvonne on Aug 04, 2015
    I used metal braces and placed them of two sides of the wooden dowel, along with wood glue and it worked great! Leave the metal braces on for added stability.
  • Mollee Kauzlarich Mollee Kauzlarich on Aug 04, 2015
    I've had luck with Gorilla tape on broken shovel handles. Just run the tape up and down the pole like a baseball bat's tape.
  • Pam Pam on Aug 04, 2015
    How about using pvc pipe to replace the broken pole.
  • Sheila Tatu,m Sheila Tatu,m on Aug 04, 2015
    Fiberfix at Home Depot (saw it on Shark Tank recently and stronger than metal) I plan on purchasing some for me!
  • Tagwatts1 Tagwatts1 on Aug 04, 2015
    As mentioned we used PVC Pipe. Drilled some on both sees so we could adjust to the hight we wanted.
  • Debra McMillan Debra McMillan on Aug 04, 2015
    I had a new patio umbrella with the pole missing that I found set on the curb for the trash man. I saved back the core role from two long rolls of heavy duty aluminum foil, and used duct tape to affix it around an old mop handle. The cores helped it fit into the umbrella hole. Still standing well, as the duct tape helped seal the codes from moisture during rain! It's even blown over several times and still works!
  • Robert Babcock Robert Babcock on Aug 04, 2015
    Take a Lg 6in. dry wall screw ,Screw it into one end of the pole ,cut the head off & screw the pole together
  • Kandy Kandy on Aug 04, 2015
    We replaced our broken umbrella pole with a wooden closet pole. If you need to, You can cut it down to size.
  • Virginia Preston Virginia Preston on Aug 04, 2015
    Have you tried taping then sliding into a pic pipe !!
  • Jennie Herrick Jennie Herrick on Aug 04, 2015
    Or replace the broken pole with a wooden dowel from the hardware store the same diameter? They can be purchased in varying lengths.
  • David Ogden David Ogden on Aug 04, 2015
    Drill a 3/8 hole in both sides of the broken pole make sure they line up and insert a 3/8 wooden dowel in the holes and glue them it works great and pretty cheap too
  • Snowhawk Snowhawk on Aug 04, 2015
    try slipping the broken pole into a slightly larger piece of PVC pipe (which you could paint to any color you want. It won't break again.
  • Pat Pat on Aug 05, 2015
    PVC pipe. Showhawk is correct. I have two.
  • Janet Janet on Aug 05, 2015
    We used an old rusty pipe to put in the ground that was hollow and had a hole threw it. The top part umbrella is very sturdy and strong and fit right in..
  • DJ DJ on Aug 06, 2015
    Depends on how big it is. I took my travel bottle of Listerine after I finished and cut the top and bottom off. Slipped the broken pole right in and there you go. Working great at least for the moment.
  • Gabrielle Falk Gabrielle Falk on Aug 08, 2015
    Buy a star pi
    • See 1 previous
    • Tina Barry Tina Barry on Jun 12, 2018
      I believe we call those T-posts in America. If not they sound very similar and would likely do the same job. They are metal posts for putting up livestock fence.
  • Norma Jean Diaz Norma Jean Diaz on Aug 09, 2015
    If it is gollow,insert a wood dowel.
  • Norma Jean Diaz Norma Jean Diaz on Aug 09, 2015
    Hollow ,.
  • Norma Jean Diaz Norma Jean Diaz on Aug 09, 2015
    Hollow ,.
  • Carrie Hawk Carrie Hawk on Aug 10, 2015
    Buy a piece of pc pipe just a bit larger than the pole, put it in the pipe and cut of the extra pipe. You can paint it to match or in an accent color.
  • Lynn Lynn on Jul 04, 2020

    I bought a display umbrella missing the lower pole, so I used pvc. The original was 1-1/2”, so 1-1/2” pvc fit over it. I just had to cut a hole for the button and put some foam around it since it’s a little loose. I can just put it into the ground wherever we want it. Haven’t painted it yet.

  • Betsy Betsy on Dec 27, 2020

    Hi Jenn: You might be able to buy a new pole, or a piece of pipe, PVC or metal.

  • Vimarhonor Vimarhonor on Jan 14, 2021

    Hello. I wonder if the diameter of a wooden closet rod would be a suitable replacement part? PVC might be a better alternative to be weather proof in exterior applications.

Your comment...