Top of Dresser
1 Material
$15
3 Days
Easy
I found a dresser In two pieces thought maybe I could put it back together then realized it might not hold and made a tv stand for my sons room.
i had to puddy a few places since this was particle board it had areas that didn't look real good. I used wood puddy and filled the gaps and sanded it down smooth. I cleaned it up with TSP a great cleaner and degreaser.
Here's a bad spot I had to puddy
here she is ready for feet. I rescued some old feet from an ottoman from the side of the road and thought thwhy would go perfect on this. I drilled 4 holes into the bottom of this piece and screwed in the bun feet.
Painted the hardware with krylon silver spray paint after soaking it several days in vinegar. I used a steel brush to get all the gunk off.
Painted the entire piece with glidden flat paint & primer in one in Royal Navy color.
Frequently asked questions
Have a question about this project?