Before and After - Vintage Desk/vanity for a Little Girl

9 Materials
I found this desk and chair at a local tag sale for $10! It had a very poor paint job but it was too cute to pass.
I don't usually sand down my pieces if I am going to repaint them. Normally a good cleaning and some light sanding and priming do the trick, but the paint job was so, so bad, that there was no way around it.
First I stripped the paint with zip strip. This product is powerful stuff and it works fast, but you do need thick gloves, a respirator and plenty of ventilation. Most people prefer more gentle products such as Citristrip but I don't have the patience to apply and clean it 4 or 5 times, so zip strip is my go to.
Next I sanded the desk, drawers and chair using my electrical sander on the flat areas and sandpaper on corners and details. I started with a 80 grit, then went to a 120 and finished with a 220.
This is the chair after a good cleaning with TSP diluted in water.
I wanted to use some beautiful turquoise knobs I bought especially for this project, so I filled the holes in all drawers using Minwax High Performance wood filler, then sanded it well making sure the surface was completely flat and smooth.
Next I drilled the holes for the new knobs.
I primed desk, drawers and chair with Rustoleum Primer spray. I had to apply two coats because the residual stain was bleeding A LOT! Bleeding is one of my worst nightmares and it happens quite often with old pieces. That's why I always use oil-based primer.
Using my inseparable friend, the spray gun, I started spraying the darker shade of blue (Benjamin Moore Cool Aqua - satin) in the interior of the drawers, as well as mirror and chair. Two coats. Once it was dry, I covered the turquoise parts and sprayed super white (Ben Moore) on the front of the drawers.
Then I sprayed the light shade (Benjamin Moore Icy moon drops) on the desk. This picture doesn't show but I taped and covered the interior of the drawer spaces to avoid overspray.
I used gray primer on the chair because I ran out of white, but since it would be painted in a darker blue, the gray worked perfectly fine. Believe it or not, the residual stain in the chair also bled through the gray, so I needed to apply two coats.
I sealed everything with Minwax Polycrylic satin (spray).
This is the final result. Sorry I don't have a closer picture of the mirror here, but you can check my blog for more pictures.
I paid $0.25 for this teddy bear in my local thrift shop. Isn't it adorable?
I can picture this set in my niece's bedroom. It's a shame she lives too far away, in Brazil.
Painting drawers on the inside is a pain, but in some cases, it just has to be done. Isn't this a nice surprise?
I am so happy with this transformation! If you decide to try it and have any questions, feel free to ask!

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Pat Rios
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

3 of 9 questions
  • Jane Jane on Jul 12, 2019

    What is the benefit to using regular paint ( like you used) verses chalk paint?

  • Christine Cajigas Christine Cajigas on Jul 23, 2019

    Omgosh, this is solo beautiful! A lot of detailed effort went in to your project. And it paid off. Thank you for so much for sharing. Whomever ends up with this, is very very fortunate. Thank you for sharing. 😊

  • Kathy Kathy on Jul 13, 2020

    Precious for your little one. I just finished a beast of a dresser and had to paint it (RetiqueIt) then stain it, then poly for protection. When I put the drawers back in it what a nightmare. None would move correctly. I had to sand and sand and sand the edges of all the drawers. I have left them "raw" so the drawers will close properly. I am scared to try anything else. What did you do so that your little drawers did not pull against the edges of the painted base? I hope that question makes sense.

Comments

Join the conversation

2 of 130 comments
Next