Limed Oak Table--The Easiest Makeover

2 Materials
$12
30 Minutes
Easy
This limed oak table is a simple makeover. Try it on a piece of furniture that might not be your style, or maybe needs a little updating.
Find Your Piece


I found this little set of nesting tables on Marketplace. The set was about $40, not too bad considering they are solid oak. I knew when I bought them, that I would not leave them with the golden oak finish. While I acknowledge that the finish is beautiful, it is just not my style or my favorite.All of the trim in our house is that golden oak color, so I get my fill of it’s beauty:) However, I didn’t think I wanted to paint these. My hope was to just lighten the finish and maybe give them a bit of an aged look. I didn’t yet know I would do a limed oak finish.
The look I was going for was like what you see at Ballard Designs. That white grain look on a stained piece of furniture. After trying a few products, I found THE BEST and easiest way to achieve that limed oakBriwax Liming Wax is what I used. This stuff is amazing and wonderful! I tried it on two of the tables. One I sanded a bit and one I left with the glossy polyurethane finish. There is absolutely no reason to sand. After trying both, the one I sanded looks no better than the one I left with the glossy finish. Actually, it seemed to settle into the grain better on the one I didn’t sand.
Apply--Even over Polyurethane


You heard me right, you can apply this over a piece that has not been stripped or sanded! You can go from an orangey oak finish to a limed oak wash finish in less than an hour! It’s almost too good to be true!This is so simple! The wax is light and fluffy, it comes out of the can so easily. Just dip your rag, or your old sock, or your son’s old sock (ahem) in the wax. Wipe some on the table. Work it into the grain. Then flip your sock over and buff it a bit with a clean part. That’s it…really! That is all there is to DIY a limed oak table!
Wipe Around
Work into the grain
Buff with a dry cloth
I am so pleased with the finish. It really toned down the orangey hue of the end table. I wish I would have started this way. Unfortunately I nearly ruined one of the tables by trying to strip it and get that lovely raw wood look. Stripping furniture is not my jam! I am way too impatient for that!
How will this hold up? I really think it will hold up pretty well. Of course, this is an end table, so it gets the occasional dusting, but it isn’t a highly used piece of furniture. However, it did dry solid and smooth, so it’s not tacky at all.If you were wanting to do this on a dining table, I would imagine you would want to put a poly finish of some sort over it. I think the daily wiping would eventually wear away the finish.
Love DIY?


If you are looking for more DIY inspiration, visit my blog, The Everyday Farmhouse!
Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
The Everyday Farmhouse
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
  • Gramama Gramama on Feb 10, 2021

    Well now I know what to do with all my, not know how this happens, single socks with no partner...

    I noticed you rubbed against the grain. Is that what works best for this particular wax?

    Looks great by the way!

  • Bernadette L Bernadette L on Feb 06, 2022

    This just might be the solution for my orangey oak kitchen cabinets. What do you think?

Comments
Join the conversation
2 of 3 comments
  • Lisa West Lisa West on Sep 10, 2020

    Very pretty. I have lime wsh paimf that my daughter picked up from home depot. Haven't used if yet. I will soon.

  • Mary McIntire Mary McIntire on Sep 11, 2020

    I think this is the solution I’ve been looking for. Thanks for sharing

Next