Plywood add backing it’s stuffing that’s flat then material over it then pull on back and staple keep pulling and staple staple top and bottom first then sides then so rest so it’s even
Have bed frame that had head and foot board with with wood side rails. No longer using foot board. How can I make the headboard freestanding. I do not want it attache...
See more
A few years ago we bought our son a CA king bed and his original king size headboard has never fit. It's too wide. It has matching side tables so we would like to ma...
See more
I like my bed to tuck in to room 's corner. Approx. 48 to 52 inches high and just deep enough for lamp, a few googaws and my CPAP machine. Oh, and inexpensive; it wou...
See more
I chose the wrong colour paint for this room and I am not going to admit it to my husband. It’s more 90’s than 2019. I hate it so much I can’t even think of ho...
See more
We are installing a new bathroom vanity in our half bath. The walls are not square so it doesn't fit snug. I am worried about water and the gap. Any ideas?
This is one that I made: https://www.craftylittlegnome.com/diy-upholstered-headboard/
https://www.hometalk.com/search/posts?filter=make%20headboard
Here are a bunch of ideas: https://www.hometalk.com/search/posts?filter=headboard
Plywood add backing it’s stuffing that’s flat then material over it then pull on back and staple keep pulling and staple staple top and bottom first then sides then so rest so it’s even