Bedroom Wall
by
Hallc46
2 Materials
$5
5 Hours
Easy
I did a whole bedroom wall and loved it. I used a 10x12x1 light weight board To draw my lines.
Wanted Murphy Beds but they have to be secured to the studs of wall so I did not want real shiplap
I did not take pictures as I did the lines but I think you can see them. I held the 12x10 board horizontal from the floor first. I drew my line all the way across the top and length of board
I moved my board up placing the bottom on the edge I just drew. Be sure and
keep a level handy. You don't want uneven lines. My husband held one end and I held the other. Yo can just secure with a nail as you move your board up but I did not want marks that I would need to repair.
Once my horizontal lines were complete I simply flipped my board vertical and drew a line on every other line. That was easy as my board went from ceiling of room to floor.
Cleaned and touched up the line
Almost done
Finished
Easy easy
Comments
Join the conversation
2 of 3 comments
-
Your wall looks fabulous!
-
Thank you Wendy
Frequently asked questions
Have a question about this project?