DIY Clay Jewelry Holder With Crescent Moon
If you are a DIY enthusiast, you can make this adorable DIY jewelry holder from clay for your jewelry loving friend!
It also looks so bohemian chic that could fit with any bohemian decor. I made a while back bohemian moon phases wall decor from clay. I think I might be a little bit obsessed with the crescent moons! They look so adorable!
Watch how to make it on my YouTube channel along other fun home decor projects from clay
1. Choose your clay. I got Sculpey Premo in Antique gold color.
2. Roll it out using a rolling pin. Make it about 1/8″ thick. You could go thicker, but I felt it should look delicate next to the jewelry, so I went for a thinner layer.
3. At first, I took a round cookie cutter, 2.5″ in diameter, and used that to shape the moon in the middle. But the edges were too even (haha if that could be a problem), so I decided to free shape it to give edges a bit of a rough and live edge.
4. Take a small piece of clay, make a sausage out of it and roll it out. Then attach it to the circle from the bottom. Smooth out the connection point and make fold the clay to create a hook.
5. Roll out clay again and shape a crescent moon. Once again, I felt that it should have a more live edge, so it’s by design! Make 4 crescent moons and add hooks to them too.
6. Bake per instructions on the package.
I left it at 275 degrees for 30 minutes.
Frequently asked questions
Have a question about this project?