If you need it MUCH smaller you could consider using bungee cords (like the pic I'm attaching), hook them to the sheet on one side then run it under the mattress and hook it to the sheet on the other side. You will want to get a rough idea of the distance so you buy bungee cords that are long enough but not TOO long.
put sheet inside out on the bed your wanting it to fit pin it so it a good fit then sew it . and if a lot is take in and not going back to use at that size cut off the extra turn right side out and put on bed
Use hair ties, for ponytails. Grab each corner and wrap one around how far needed to get it to fit. You could use rubber bands also but the ponytail hair ties are much stronger! Hope this helps!
I have a coat closet which is 19 1/2" D x 30" W x 90"H. The pictures show my largest frustration which is the hangers must sit sideways due to the depth of the close...
See more
I would like to put my canned goods in some type of order so you can see what they are and get to them more easily. Right now, they are stacked on top of each other b...
See more
I have tied, pinned, and folded but NOTHING keeps the blankets from falling on the floor...there used to be an adjustable lightweight rail that went at the foot of th...
See more
Pictured is my hall coat closet. This is the floor footprint: 4.5' X 1'X 4.5' X 2.5'. But not square, sort of angled. There was a single wire rack extending across th...
See more
just a bit smaller? for the same size bed? if the sheet has some cotton in it, a run or two thru the dryer should do it
If you need it MUCH smaller you could consider using bungee cords (like the pic I'm attaching), hook them to the sheet on one side then run it under the mattress and hook it to the sheet on the other side. You will want to get a rough idea of the distance so you buy bungee cords that are long enough but not TOO long.
i would forego the bungees and use these. You can get at Walmart too. https://www.amazon.com/Nyche-Designs-Adjustable-Bed-Fasteners/dp/B00TGPU3FC
Sheet straps will also work. Something like this:
https://www.amazon.com/3-Way-Holder-Triangle-Fastener-Gripper/dp/B01FXQJMDG/ref=asc_df_B01FXQJMDG/?tag=hyprod-20&linkCode=df0&hvadid=191929469666&hvpos=1o1&hvnetw=g&hvrand=7942749448385545203&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9031180&hvtargid=pla-302833753425&psc=1
put sheet inside out on the bed your wanting it to fit pin it so it a good fit then sew it . and if a lot is take in and not going back to use at that size cut off the extra turn right side out and put on bed
Use hair ties, for ponytails. Grab each corner and wrap one around how far needed to get it to fit. You could use rubber bands also but the ponytail hair ties are much stronger! Hope this helps!