For the earring holder: I got the frame already white from hobby lobby 50% off and the furnace cover metal from Home Depot. It comes it small sheets and cuts with scissors the spinning butterfly and other hooks are hobby lobby by the knobs and waited for % off and a few from amazon. Already painted
We took a plank of wood about 18"x3", stained it then glued painted clothes pins to it. Then hung my bracelets and necklaces on each clothes pin. No more tangled chains.
I guess I have a lot of jewelry because I store in lots of different ways. Have a fairly large wooden box with drawers, ring slots, divisions, etc. also have a sort of similar one in the basement that I have never done the stripping (of the wood exterior) but must do that before I die. Also hang a lot of necklaces. For earrings I have a large plastic box with divisions, have three smaller ones for chain and special necklaces. For silver bracelets a lined box, for other bracelets a bowl in a drawer. None of my jewelry is "good" just plentiful.
Take a frame and staple inside of it screen material. Then drapery hooks hook in the screen and make great holders. Works great for earrings also, that don't have posts.
I have a coat closet which is 19 1/2" D x 30" W x 90"H. The pictures show my largest frustration which is the hangers must sit sideways due to the depth of the close...
See more
I would like to put my canned goods in some type of order so you can see what they are and get to them more easily. Right now, they are stacked on top of each other b...
See more
I have tied, pinned, and folded but NOTHING keeps the blankets from falling on the floor...there used to be an adjustable lightweight rail that went at the foot of th...
See more
Pictured is my hall coat closet. This is the floor footprint: 4.5' X 1'X 4.5' X 2.5'. But not square, sort of angled. There was a single wire rack extending across th...
See more
https://www.hometalk.com/search/posts?filter=jewelry%20organizer
This is an older post, so apologies for the quality, but you can see how I made mine. Good luck! Hugs, Holly
https://pinkfortitude.com/jewelry-holder/
For the earring holder: I got the frame already white from hobby lobby 50% off and the furnace cover metal from Home Depot. It comes it small sheets and cuts with scissors the spinning butterfly and other hooks are hobby lobby by the knobs and waited for % off and a few from amazon. Already painted
We took a plank of wood about 18"x3", stained it then glued painted clothes pins to it. Then hung my bracelets and necklaces on each clothes pin. No more tangled chains.
I guess I have a lot of jewelry because I store in lots of different ways. Have a fairly large wooden box with drawers, ring slots, divisions, etc. also have a sort of similar one in the basement that I have never done the stripping (of the wood exterior) but must do that before I die. Also hang a lot of necklaces. For earrings I have a large plastic box with divisions, have three smaller ones for chain and special necklaces. For silver bracelets a lined box, for other bracelets a bowl in a drawer. None of my jewelry is "good" just plentiful.
Take a frame and staple inside of it screen material. Then drapery hooks hook in the screen and make great holders. Works great for earrings also, that don't have posts.