Coat Rack

by John Wade

3 Materials

1 Day

Easy

This is the easyiest coat rack to make if you know how to paint and use a screw gun (coardless drill)

1st you take a pallet board or any board and sand it down with 80 and 120 grit sandpaper until it's smooth

Next you take your stain that's what I use or paint with stain you wipe it on and wipe it off and that pulls out the grains of the wood

I set the board on risers after I stained it to keep off of flat surfaces to let dry

Then I had old hooks i got at a flea market and spray painted them black and the wood screws black as well that holds the hooks on and on this job black goes well with this gun stock stain I used for the board

After the hooks dried I spreaded them apart every 5 inches and centered them even from end to end

hear is what it looks like before it's hung up

Here is the finished coat rack that took 1 day to do i had to wait for it all to dry and there was no cuts and the only tool I used was my coardless drill to screw the screws that hold the hooks to the board

Enjoyed the project?

You can do it! Saved to your projects

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.

Hometalk may collect a small share of sales from the links on this page.More info