DIY Marbled Resin Coffee Table

11 Materials
$200
3 Days
Advanced

You guys I have been waiting to share with you my Coffee Table which I made with my own Two Hands okay not really Two maybe Four as I needed a little help from the husband.I still can’t believe it is completed, not because it was complicated to make or anything but it had a lot of steps that had to be done before I could move onto the next. Alot of waiting games had to be played.

I ordered a wooden pieces in the size 2ft by 4ft, 3/4 inch thickness as I knew I would make it into a coffee table.

I stumbled upon these beautiful Agate Crystal Slices and from that point onwards I knew I had to incorporate it in my design someway somehow.

So I decided on a creating a Marbled Pattern. The top of the table was going to be split in three parts. Two of the sides would have the Marbled Patten and in the middle I would showcase the Agate Slices.

I taped off the middle completely with masking tape so I could work on the Marbling without having to worry about the paint staining the centre.

Then I poured each paint one by one and moved the wood panel around to create the Marbled design.

When the paint had dried, I glued on the Agate Slices and topped off the entire table with Resin.

I had to wait In between adding the resin layers as it needed about three coats in total.

To finish off the sides of the table I attached wood pieces on all four sides of 3/4 inch thickness.I stained the wood pieces first using a dark wood coloured stain. When it was dry I screwed it into the sides of the coffee table.

The last step was to attach the hairpin legs which is really easy to do as you just flip the table and screw in the legs.

Here is the final result.

And there you have it.

What do you guys think?

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Anam - Delicious And DIY
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

  3 questions
  • Corinne Corinne on Apr 11, 2019

    You poured 3 coats of resin on the entire table? How did it stay on top of the table without running off the edge?

  • Gruber Gruber on Apr 26, 2019

    How much did it cost? :) its so good

  • BettyAnn BettyAnn on May 11, 2019

    t what point did you add the glitter... kind of an important step to leave out. Did you pour one layer of resin and then add glitter. I really like this and the glitter really makes it pop.

    Betty

Comments

Join the conversation

2 of 18 comments
  • Dani Dani on May 09, 2019

    very inspiring .. I have a kitchen table that would like to try something like this... thanks for sharing..

  • Crumly Crumly on Oct 11, 2019

    Very cool. I love agates.

Next